ARCHITECTURAL HIGH PERFORMANCE 10
3Pages

ARCHITECTURAL HIGH PERFORMANCE 10 Ambient (Unheated) Air Curtain Data Sheet For Door Heights To 10’ (environmental separation) and 8’ (insect control) STANDARD CONSTRUCTION • • • • • • • 12 ¼” high x 21 ¼” deep 1/2 hp three speed motor(s) Factory installed fan speed switch Clear satin anodized aluminum exterior (Optional: Custom Color or Stainless) Wall & Top Mounting High efficiency, low noise Pro-V Nozzle Optional: Filter (washable) Berner International Corporation certifies that the air curtains shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Rated data shown is for base (unheated) units. The AMCA Certified Ratings Seal applies to airflow rate, average outlet velocity, outlet velocity uniformity, velocity projection and power rating at free delivery only. 5 Year Limited Warranty NOTE: Operation at 50 Hz will generate approximately a 17% reduction in air performance. See sheet EP-210 for amp draws/total load requirements. VELOCITY PROFILE: Model AHC10-1036A MODEL NUMBER CONFIGURATION Distance from Nozzle (ft) Opening Width Opt. Switch Remote Switch Opt. Cabinet Finish SS=Stainless Steel CC=Custom Color Sound level measured 10’ (3m) from the unit in free field: 1 motor: Low/Medium/High Speed: 54/55/56 dBA 2 motors: Low/Medium/High Speed: 57/58/59 dBA 3 motors: Low/Medium/High Speed: 60/61/62 dBA Sound data is not AMCA certified. Berner reserves the right to alter specifications without prior notice. Berner International Corporation

ARCHITECTURAL HIGH PERFORMANCE 10 ERINIER Ambient (Unhealed) Air Curtain INTERNATIONAL CORP Electrical Performance Sheet Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International Corporation 800.245-4455 EP-210 111 Progress Ave. / New Castle / PA / 16101 / USA June, 2015 ©Copyright, 2015 Berner International Corporation

WALL MOUNTING PLATE- MOUNTING WIDTH AMBIENT SYSTEM SILICON RUBBER " VIBRATION DAMPER BACK COVER REMOVE PHILLIPS SCREW TO ACCESS INTAKE SCREEN(S) LOCKING SCREWS AIR CURTAIN MUST BE INSTALLED SO AIR STREAM IS NOT OBSTRUCTED WHEN DEFLECTED 20° TO EITHER SIDE OF £, ELECTRICAL CONNECTIONS TO BE FLEXIBLE, FIELD VERIFY DIMENSIONS, ANCHORS TO SUPPORTING STRUCTURE BY OTHERS. ADEQUACY OF SUPPORTING STRUCTURE IS TO BE VERIFIED Y A PROFESSIONAL STRUCTURAL ENGINEER, LETTER 'A" IN MODEL NUMBER DESIGNATES AMBIENT UNIT, DIMENSIONS IN INCHES [CENTIMETERS], MODEL AHCIO AIR CURTAIN AMBIENT SYSTEM