SPI-9018-7001-7046-EN
2Pages

{{requestButtons}}

Catalog excerpts

SPI-9018-7001-7046-EN - 1

TECHNICAL SHEET SPI/9018 7001 7046 EXPRESS PRIMER FILLER DESCRIPTION SPI/ is a filler used for the quick repair of small body surfaces for car refinish. Stands out from other conventional fillers for: Fast drying. Sandability with fine grain sandpaper. Without leaving marks around the spot. Recoatability. Excellent adhesion on steel, aluminum, electrozinc and galvanized. SURFACE PREPARATION The substrate must be deoxidized, degreased and dry. Sand and apply directly with 2C polyester putty. Sand previously with P360- P400 on good adhered old paints. Do not use on thermoplastic acrylic topcoats or synthetic paints (alkyd base). APPLICATION Shaking time Painting distance Evaporation time Drying time 20´ W/w recoatable after 20´ with both water and solvent based systems. P400 / P500 After 1h. (sanding if needed)

Open the catalog to page 1
SPI-9018-7001-7046-EN - 2

TECHNICAL SHEET SPI/9018 7001 7046 EXPRESS PRIMER FILLER SAFETY AND HYGIENE Recommendable to use the appropriate personal protective equipment during application to avoid irritation of breathing tract, skin and eye irritation. For professional use only. STORAGE Keep covered in a dry and ventilated place, avoiding direct exposure to sunlight. We advise Temperature above 5ºC, recommended between 15-30ºC. VOC SPI/ has a lower organic solvent content than the traditional, compliant with the European Norm 2004/42/CE II(E) (840)<840g/l The information contained in this Technical Data Sheet is...

Open the catalog to page 2

All Bernardo Ecenarro catalogs and technical brochures