TECHNICAL SHEET SERIE / W6000 WATERBORNE BASECOAT SYSTEM PRODUCTS WS/ Solid Bases WM/ Metallic Bases WP/ Pearl Bases WX/ Xirallic Bases WT/ Colorstream Bases WA/ Additives WSO/ Water Based Diluents DESCRIPTION The W6000 Series is a very high performance water-based system with excellent hiding power and blending capability, which achieves a high productivity and an excellent finish. A thorough work in our color laboratories, and a strict quality control of both raw materials and of the system basics, guarantees a perfect match on solid, metallic, pearls or special effect colors. The color chart is sorted in chromatic order, which is a great help when matching the colors. Furthermore, the use of the Spectrophotometer allows full access to the complete database, converting the color readings into the best and most accurate combination of colors. In combination with the Putties, Varnishes and Fillers of SINNEK, the W6000 Series guarantees a perfect Car finish, with an excellent gloss, appearance and durability SUBSTRATES Application on steel: PF/9110, PF/7040, PF/7016 after sanding with P320, P400. PW/9110, PW/7040, PW/7016 wet on wet. Application on plastics: PL/7870, PL/9005 for painting bumpers. PL/1895 for painting several plastic materials: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP. SURFACE PREPARATION Degrease with SO/1020 - SO/4020 silicone cleaner, dry with a clean cloth and use the tack cloth.

TECHNICAL SHEET SERIE / W6000 WATERBORNE BASECOAT SYSTEM SERIE W6000 PREPARATION BICOAT PROCESS SOLID COLORS Mixing ratio METALLIC, PEARL AND SPECIAL EFFECT COLOR Recommended Viscosity application at 20ºC 25-35” Maximum coverage with 10-15% WSO/6000-6001-6002. With high temperatures dilute up to 35% to avoid overspraying and obtain a correct distribution and orientation of Aluminum and pearl particles. Recommended filters Use SINNEK filters recommended 125 mµ. Use SINNEK filters recommended 125-190 mµ. PEARL BASE / SPECIAL EFFECT COLOR WP-WX-WM-WT TRICOAT PROCESS / SPECIAL EFFECTS Mixing ratio...

TECHNICAL SHEET SERIE / W6000 WATERBORNE BASECOAT SYSTEM SERIE W6000 APPLICATION 1,2 - 1,3 mm 1,5-2 bar Solids 1-2 coats Evaporate between coats Metallic / Pearl 1-2 coats. 1 light coat for effect control Let evaporate between layers. Tricoat Pearl Fine layers up to original color Previously, corresponding first coat Evaporation at 20 0C Drying with Dry Jet 15-20’ Until complete evaporation or matt before using the clearcoat on top 15-20’ Until complete evaporation or matt before using the clearcoat on top Gravity spraygun Application pressure - In order to reduce the application and drying times...

TECHNICAL SHEET SERIE / W6000 WATERBORNE BASECOAT SYSTEM SAFETY AND HYGIENE Recommendable to use the appropriate personal protective equipment during application to avoid irritation of breathing tract, skin and eye irritation. For professional use only. STORAGE Ready to use colors: 2-3 months. After this time, please contact our technical department. Keep covered in a dry and ventilated place, avoiding direct exposure to sunlight. We advise Temperature above 5ºC, recommended between 15-30ºC. VOC The Serie W6000 has a lower organic solvent content than the traditional, compliant with the European...

DILUTION GUIDE FOR DIFFERENT PROCESSES RECOMMENDED PROCESS STANDARD RECOMMENDED PROCESS ALTERNATIVE PROCESS STANDARD ALTERNATIVE PROCESS *If the formula has more than a 50% of coarse aluminium pigments, reduce the dilution in a 5% from the above recommended guide. RECOMMENDED PROCESS ALTERNATIVE PROCESS *Three layer colors 1st coat 15-20%. *Three layer colors 2nd coat 30-35% * All the percentages indicated must be considered as a guide.