PP/1440 LIGHT PUTTY
2Pages

SKNEK PP/1440 PP/1440 LIGHT PUTTY DESCRIPTION PP/1440 is a polyester putty designed for the filling of dents, with good adhesion on steel, aluminum, eiectrozinc or galvanized steel and polyester. Outstands for: It is a “very light" putty that allows an easy application, fineness and total absence of pores. Extraordinarily easy to sand, even after 2 days. High yield. Great filling capacity. PREPARATION OF SURFACE The surface to be repaired must be deoxidized and free of grease; Previous sanding is recommendable. Do not use putty on wash or phosphatant primers nor thermoplastic topcoats. Recoatable with SINNEK PF or PW Primer Filler .

TECHNICAL SHEET SAFETY AND HYGIENE Recommendable to use the appropriate personal protective equipment during application to avoid irritation of breathing tract, skin and eye irritation. For professional use only. STORAGE Keep covered in a dry and ventilated place, avoiding direct exposure to sunlight. We advise Temperature above 5ºC, recommended between 15-30ºC. VOC PP/1440 has a lower organic solvent content than the traditional, compliant with the European Norm 2004/42/CE II(B) (250) <250g/l The information contained in this Technical Data Sheet is based on our knowledge and experience...