Pressure Reducing Valve with solenid control IR-420-55 The BERMAD Model IR-420-55 Pressure Reducing Valve with Solenoid Control is a hydraulically operated, diaphragm actuated control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. The BERMAD Model IR-420-55 opens and shuts in response to an electric signal. Features and Benefits ■ Line Pressure Driven PRV, Electrically Controlled On/Off □ Protects downstream systems □ Wide range of pressures and voltages □ Normally Open, Normally Closed or Last Position ■ Advanced Globe Hydro-Efficient Design □ Unobstructed flow path □ Single moving part □ High flow capacity ■ Fully Supported & Balanced Diaphragm □ Requires low opening and actuation pressure □ Excellent low flow regulation performance □ Progressively restrains valve closing □ Prevents diaphragm distortion ■ User Friendly Design □ Easy pressure setting □ Simple in-line inspection and service Typical Applications ■ Pressure Reducing Stations ■ Flow and Leakage Reduction ■ Cavitation Damage Protection ■ Source and "On Duty” Valves Management ■ Pressure Zone Isolation ■ Downhill Supply Lines ■ System Maintenance Savings [1] BERMAD Model IR-420-55 opens in respond to an electric signal establishing reduces pressure zone. [2] BERMAD Water Meter Modle WPH [3] BERMAD Air Relief Valve Model ARC-A-I-I

Flow Chart BERMAD IrrigationIR-420-55 For full technical details, refer to Engineering Section. Technical Data Patterns and Sizes: Globe: 3-16”; DN80-400 Angle: 3-4”; DN80-100 End Connections: Pressure Rating: 16 bar; 232 psi Operating Pressure Range: 0.5-16 bar; 7-232 psi For lower pressure requirements, consult factory Setting Range: 1.5-16 bar; 22-232 psi Setting ranges vary according to specific pilot spring. Please consult factory. Materials: Body and Cover: Polyester Coated Cast or (10”; DN250 and larger) Ductile Iron Spring: Stainless Steel Diaphragm: Nylon fabric Reinforced NR with rugged...