TECHNICAL DATA SHEET | CONTROLS S. 1/2 PLC controller with 50 inputs / outputs There is a solution to spatial problems caused by the increasingly smaller installation space in machinery and equipment: the CEDIO-P 24/24/2 control module. With 24 digital inputs and 24 high-performance digital outputs on the smallest of spaces, spatial problems are reduced to a minimum. Two additional analogue outputs are available for driving peripheral devices. -> 48 digital inputs and outputs PLC programming CODESYS is the efficient programming environment for the CEDIO-P 24/24/2. Programming, input/output configuration, communication and visualization are combined Web visualization The web visualization of the application control can be called up via a PC with an Internet browser. It can be used for operating and monitoring machinery and equipment via the Service and remote Web servers and optional FTP and e-mail functionality ensure that the control is globally maintenance accessible. Communication Ethernet, USB, RS232 and 2 CAN interfaces form the basis for fast data exchange. This enables field bus input/output and host visualization systems to be supplied with the right Processor and memory High-performance PowerPC CPU 400 MHZ with FFP for speeding up floating-point inten- sive computations. With its 128 MB RAM and 32 MB Flash, it offers sufficient memory even for complex applications.

TECHNICAL DATA SHEET | CONTROLS | CEDIO-P24/24/2 Module data Version Development environment with up to 6 E-bus expansion modules (e. g. QDIO, QAIO) Flash EPROM /SRAM Supply voltage, current consumption Power supply, module electronics (connection voltage) Power supply, digitale I//Os Power consumption At Ue = DC +24 V in neutral, a max. of 300 mA, all I/O = active approx. 8 A Potential isolation Digital Inputs / outputs Number of inputs 24, 2 groups with 4 A; each output max. 0,5 A Short circuit protection Connection technique Standing 1-wire front wiring with terminal strips Analog outputs...