Condensate technology | BEKOMAT ® 20 | 20 FM Get a grip on condensate: protect resources and boost efficiency with the BEKOMAT® During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. Condensate discharge without compressed air loss The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volumecontrolled condensate discharge and and the proven pilot control of the solenoid valve. The BEKOMAT® for filters and water separators The BEKOMAT® 20 is a sturdy condensate drain designed for use in water separators, filters and similar equipment. It is suitable for oil-lubricated plants as well as oil-free compressors. The control panel is accessible from the top and the front. It has a plastic housing with integrated aluminium condensate container. The BEKOMAT® 20FM with integrated filter management (filter service life monitor and indicator) is a costeffective monitoring solution for the connected filter element. ›› No compressed air lost during draining ›› Low operating costs ›› Outstanding reliability ›› Durable and resistant to dirt ›› Large valve diameters prevent the formation of emulsions ›› No delicate mechanical components ›› For operation at temperatures up to +60 °C ›› Easy to install and virtually maintenance-free ›› Automated operation and monitoring ›› Ready for integration into modern system monitoring installations ›› Automatic s

Technical data * Short-term peak volume can only be achieved if the device is correctly installed according to the operating manual. Max. refrigeration dryer performance Max. filter performance Min./max. operating pressure 4 m³/min | 2.5 m³/min 8 m³/min | 5 m³/min 40 m³/min | 25 m³/min aluminium + plastic, glass fibre reinforced Ambient temperature Weight (empty) Condensate inlet Condensate discharge 1 x G¼; hose connector, hose Ø = 8-10 mm (inside) Operating voltage Power consumption Protection class Wire cross-section (mains connection) recommended for AC: 1 A slow / mandatory for DC: 1 A slow...