Overview

This technical document appears to be a product brochure or specification sheet from Beretta Alfredo srl, dated May 2011. It provides performance data and technical parameters related to hydraulic or mechanical components, likely related to torque or power transmission systems.

Technical Specifications

• Max Oil Feed Rate: Two values are given: 24 l/min (6.30 gal/min) and 36 l/min (9.50 gal/min), indicating different system configurations or models.
• Max Working Pressure: 200 bar (2845 PSI) for both configurations.

Performance Data

The document includes tables with speed, torque (daNm and lb-ft), and RPM values. These data points likely represent operational parameters such as torque output at various speeds and pressures. Specific values include torque up to approximately 2531 daNm (1867 lb-ft) and speeds ranging from low RPMs to higher values, indicating the performance range of the equipment.

Product Improvement Notice

Beretta Alfredo srl reserves the right to modify product data without prior notice and disclaims responsibility for such changes, emphasizing continuous product improvement.

Contact Information

Beretta Alfredo srl
Via Vignareto, 10
20842 Besana in Brianza (MB), Italy
Tel: +39 01362 995380
Fax: +39 01362 395708
Website: www.berettaalfredo.it
Email: [email protected]

Summary of Critical Parameters

• Max Oil Feed: 24 l/min and 36 l/min options
• Max Pressure: 200 bar
• Torque Range: Up to ~2531 daNm
• Speed Range: Various RPM values corresponding to torque outputs

Limitations and Recommendations

The document does not explicitly state limitations or operational guidelines but implies adherence to maximum pressure and oil feed rates for safe and optimal performance.