- Catalogs
- Berardi Bullonerie srl
- AF760 - Parabolic anti-vibration mount buffer-male
AF760 - Parabolic anti-vibration mount buffer-male
1 / 1 PageView full catalog
AF760 - Parabolic anti-vibration mount buffer-male
Product catalog summary
Specifications
The document provides specifications for a series of parabolic anti-vibration mounts, identified by codes such as AF76020240618, AF76025200618, etc. Each code corresponds to a specific set of dimensions and characteristics, including:
The document provides specifications for a series of parabolic anti-vibration mounts, identified by codes such as AF76020240618, AF76025200618, etc. Each code corresponds to a specific set of dimensions and characteristics, including:
- Dimensions: D, D1, H, L (all in mm with a tolerance of ±1 mm)
- Thread Size: M6, M8, M10, M12, M16
- Maximum Load: Ranges from 40 daN to 1300 daN
- Deflection: Ranges from 10 mm to 50 mm
- Package Quantity: Varies from 5 to 50 pieces
Standards and Materials
The mounts conform to the DIN 95364/F standard. The materials used include:
The mounts conform to the DIN 95364/F standard. The materials used include:
- Body: Natural rubber (NR)
- Pin: Cl 4.8 steel, white galvanized
- Washer: DD11 steel, white galvanized
Operating Conditions
The mounts are designed to operate within a temperature range of -50°C to 80°C.
The mounts are designed to operate within a temperature range of -50°C to 80°C.
Notes
- The maximum load indicates the highest compressive load the mount can support without compromising functionality. Traction should be avoided.
- Deflection refers to the height variation of the rubber under maximum load.
- Other materials, hardnesses, dimensions, and colors are available upon request.
See more
Catalog excerpts
PARABOLIC ANTI-VIBRATION MOUNT buffer - male STANDARD DIN 95364/F MATERIAL - SURFACE TREATMENT Body: NR (Natural rubber) Pin: Cl 4.8 (Steel) white galvanized Washer: DD11 (Steel) white galvanized RUBBER HARDNESS 60 Shore A (±5) OPERATING TEMPERATURE -50°C ÷ 80°C NOTES * Indicates the maximum load that can be supported before its functionality is compromised. The load must be compressive - avoid applying traction. ** Indicates the height variation of the rubber under maximum load. Available in other materials, hardnesses, dimensions, and colours. www.gberardi.com - ec@gberardi
Open the catalog to page 1All Berardi Bullonerie srl catalogs and technical brochures
MFC02 - Fir tree clips1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.