BENZ Tooling Units for Profile Slot Milling

Product catalog summary

Overview: This document provides technical specifications and procedures for profile slot milling, focusing on tooling technology for materials such as wood, composites, and aluminum. It outlines different product lines and their lubrication methods, as well as detailed procedures for creating a 90° corner connection using profile slot connectors.

Specifications:

Product Lines: Classic Line with grease lubrication and Premium Line with oil bath lubrication.
Profile Slot Position/Angle: Options include single-sided, double-sided, four-sided, and adjustable angle heads.
Depth: Various depths are specified for different milling units.

Procedures:

Drilling: Drill an opening to facilitate the permanent fixing of the connecting system.
Horizontal Milling: Mill the profile slot horizontally for connector insertion.
Vertical Milling: Mill the profile slot vertically on the mating piece for connector insertion.
Insert the Connector: Manually insert the connector into the profile slot without tools.
Assembly: Join workpieces and tighten connectors with a hex wrench.
Finished Corner Connection: Once tightened, the workpiece is ready for use.

Contact Information:

BENZ GmbH Werkzeugsysteme, Kinzigpark 3, 77723 Gengenbach, Germany. Phone: +49 7803 504 300-0, Email: [email protected], Website: www.benztooling.com

Catalog excerpts

Wood / Composites / Aluminium machining a t o o L I N G

Open the catalog to page 1

PRODUCT COMPASSUNITS FOR PROFILE SLOT MILLING CREATING A 90° CORNER CONNECTION WITH PROFILE SLOT CONNECTORS DRILLING Drill the opening to work through. The connecting system will later be fixed permanently in place through the opening. Mill the profile slot for inserting the connector (horizontal machining). Mill the profile slot for inserting the connector on the mating piece (vertical machining). The connector can be pushed into the profile slot manually in just seconds, without any tools. Join the two workpieces together and tighten the connectors through the opening with a hex wrench. After...

Open the catalog to page 2