Tribalancer datasheet

Product catalog summary

Overview: The TriBalancer by Benstone Instruments, Inc. is a multifunctional device designed for grinding machinery, combining a balancing analyzer, vibration meter, and tachometer. It aims to enhance machining quality and efficiency while extending the life of machinery components.

Technical Specifications:

Vibration Levels: Minimum of 0.1mg, 0.005mm/s, 0.03um at 1800rpm; Maximum of 40g (Acceleration).
Phase Accuracy: 0.01 degrees.
Gain: Adjustable from 1 to 10,000 in steps of 1, 2, 5, 10 (Auto).
Accelerometer Sensitivity: 5mV/g to 1,000mV/g.
Operating Temperature: 0 to 75˚C (32 to 167˚F).
Display: 7-Segment LED.
Power Consumption: 750mW.
Device Size: 235 x 190 x 55mm (9.25 x 7.48 x 2.16 inches).
Power Supply: Universal (100-240 VAC, 50/60Hz) or Battery.

Vibration Meter Features:

Display Unit: μm (peak to peak).
Measurement Range: 0.1 to 199.9 μm at 100mV/g.
Filter: 10 to 1K Hz Band Pass.
Accuracy: Less than 2%.
Accelerometer Bias Check: Short/Open/Normal.

Tachometer Features:

Distance: 1mm to 1M, within 45 degrees.
Sensor: Optical Sensor with Stand.

Balancing Features:

Speed: 180 to 14,000 RPM.
Operation Time on DC Power: 1.5 hours.

Accessories: Includes a tachometer with magnetic base, accelerometer with screw, BNC to Mil2 pin cable, protractor, reflective tape, aluminum hard carrying case, power cable, user manual, product warranty card, operation CD, and certificate of calibration.

Key Features:

Balances the grinder on the machine in approximately 5 minutes.
Achieves a vibration level of 0.1 μm, significantly faster than static balancing.
Continuously monitors machine vibration levels to improve machining quality and efficiency.
Reduces surface roughness and chatter, extending the life of the grinder and spindle bearing.

Catalog excerpts

TriBalancer: the three-in-one instrument for grinding machinery. Balancing Analyzer • Vibration Meter • Tachometer

Open the catalog to page 1

TriBalancer Balancing Analyzer • Vibration Meter • Tachometer Technical Specifications Phase Accuracy Operation Temperature Power Consumption Device size Power Supply Vibration Meter Vibration Display Unit Display μm (peak to peak) Vibration Measurement Range Vibration Filter Accuracy of Vibration Level Bias Check of Accelerometer Optical Sensor with Stand Balancing Speed Operation time of DC power Tachometer with Magnetic base Optical Sensor Accelerometer with screw Reflective Tape Aluminum Hard Carrying Case Power Cable User's Manual Product Warranty Card FEATURES: • Balance the grinder on...

Open the catalog to page 2

Tribalancer datasheet

Tribalancer datasheet

Catalog excerpts

All Benstone Instruments, Inc. catalogs and technical brochures