Catalogs >
BENDER >
Measuring current transformersW0-S20...W5-S210W10/600

Measuring current transformersW0-S20...W5-S210W10/600
4Pages

Add to favorites

Catalog excerpts

Measuring current transformersW0-S20...W5-S210W10/600 - 1

Measuring current transformers W0-S20…W5-S210 W10/600 Vorläufiges Datenblatt

Open the catalog to page 1

Measuring current transformersW0-S20...W5-S210W10/600 - 2

Measuring current transformers W0-S20…W5-S210 W10/600 Product description The highly sensitive W0-S20…W5-S210 series measuring current transformers convert residual currents up to 100 A into evaluable RCM or EDS signals. The CTs are connected to the respective evaluator by two wires. Depending on the connecting lead used, the distance between the CT and the evaluator may be up to 40 m. Care should be taken that all current-carrying conductors are passed through the CT and that these conductors are not shielded. Never route a PE conductor through the measuring current transformer! Typical...

Open the catalog to page 2

Measuring current transformersW0-S20...W5-S210W10/600 - 3

Measuring current transformers W0-S20…W5-S210 W10/600 Dimension diagrams Type W10/600 Type W1-S35…W5-S210 Dimensions (mm) Type

Open the catalog to page 3

Measuring current transformersW0-S20...W5-S210W10/600 - 4

Technical data Installation instructions • o not pass shielded cables through the measuring current D transformer. Measuring circuit Rated transformation ratio Rated burden Phase displacement Rated primary current Rated primary current Nominal power Rated frequency Internal resistance Secondary overvoltage protection Accuracy class Rated continuous thermal current Rated short-time thermal current Rated dynamic current 600/1 180 Ω (18 Ω at 100 A) <4° ≤10 A (100 A) ≥10 mA 50 mVA 15…400 Hz 5…8 Ω with suppressor diode P6KE6V8CP 3 100 A 14 kA 1 s 35 kA 30 ms • a general principle, the PE...

Open the catalog to page 4