video corpo

Energy meter
6Pages

{{requestButtons}}

Catalog excerpts

Energy meter - 2

Energy meter Product description Along with numerous measuring values, all PEM series devices can measure energy and power values. If, however, a measuring point is used for billing purposes, special requirements must to be met (subject to obligatory calibration). Energy meters with the Measurement Instrument Directive (MID) conformity mark meet these requirements. Standards The energy meters have been developed in accordance with the following standards: Accuracy class B acc. to EN 50470-3, accuracy class 1 acc. to IEC 62053-21. Technical data ALD1 Accuracy class B acc. to EN 50470-3 1...

Open the catalog to page 2
Energy meter - 3

Energy meter Ordering information Energy meter 1Ph/32 A MID Modbus RTU Energy meter 3Ph/65 A MID Modbus RTU Energy meter 3Ph/6 A MID Modbus RTU S0 pulse counter (four-fold) with Modbus RTU Sealable cover for ALD1 (two per counter) Sealable cover for ALE3/AWD3 (four per counter) Dimension diagram Dimensions in mm 1 phase

Open the catalog to page 3
Energy meter - 4

Energy meter Wiring diagrams ALD1 Modbus via serial RS-485 interface N 3N Energy/pulse counter Modbus via serial RS-485 interface Energy/pulse counter Connections E1 and E2 To switch between tariffs, connect to the control signal of the ripple control receiver. 4 Energy-meter-PQ_D00230_02_D_XXEN/09.2021

Open the catalog to page 4
Energy meter - 5

Energy meter Wiring diagrams AWD3 Modbus via serial RS-485 interface Energy/pulse counter The secondary current transformer connection on the network side has to be connected to the phase to be measured. For this reason the current transformer must not be earthed.

Open the catalog to page 5
Energy meter - 6

BENDER Group Energy-meter-PQ_D00230_02_D_XXEN / 09.2021 / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 09.2021 unless otherwise indicated. Bender GmbH & Co. KG Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • info@bender.de • www

Open the catalog to page 6

All BENDER catalogs and technical brochures

  1. CTBC17

    2 Pages

  2. POWERSCOUT®

    8 Pages

  3. RDC121

    7 Pages

  4. RCMB123

    7 Pages

  5. RCMB 121-2

    7 Pages

  6. RCMB121-1

    7 Pages

  7. RDC104-4

    6 Pages

  8. 300ST

    4 Pages

  9. 400ST

    4 Pages

  10. USC710D4

    6 Pages

  11. DI-1DL

    4 Pages

  12. DI-2

    4 Pages