Catalogs >
BENDER >
DI-2

DI-2
4Pages

Catalog excerpts

Product description The DI-2 converter is designed for the connection of personal computers and workstations utilising an RS-232 interface with Bender devices utilising an RS-485 interface. The hardware and software of the computers need not to be changed. A typical application is the connection of a personal computer to a BMS network. Application • Conversion of RS-232 signals into RS-485 signals • arameterisation of alarm indicator and operator panels (MK800, MK2430) with RS-485 P interface via PC with RS-232 interface using software Interface converter DI-2USB Device features • Plastic...

Open the catalog to page 2

Wiring diagram (example) Technical data Insulation coordination acc. to IEC 60664-1 Rated voltage Rated impulse voltage/pollution degree Supply voltage Supply voltage US Power consumption Interfaces DI-2 for the integration of a personal computer utilising an RS-232 interface into a BMS network. Note: Terminate both ends of the BMS bus with 120 Ω resistors (R) Dimension diagram Dimensions in mm BMS Interface/protocol 1 x RS-485/– Baud rate 9.6…115.2 kbit/s Cable length ≤ 1200 m Cable (twisted in pairs, one end of shield connected to PE) recommended: J-Y(St)Y min. 2 x 0.8 Mode– Connection...

Open the catalog to page 3

Subject to change! – TDB109010en / 05.2013 / Schw / © Bender GmbH & Co. KG, Germany Bender GmbH & Co. KG P.O. Box 1161 • 35301 Grünberg • Germany Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: info@bender-de.com • www.bender-de.co

Open the catalog to page 4

DI-2 4Pages

Catalog excerpts

All BENDER catalogs and technical brochures

DI-2
4Pages