Catalogs >
BENDER >
COMTRAXX® COM465ID

COMTRAXX® COM465ID
8Pages

Catalog excerpts

COMTRAXX® COM465ID Condition Monitor with an integrated gateway for the connection of Bender isoData devices to Ethernet TCP/IP networks

Open the catalog to page 1

Condition Monitor with an integrated gateway for the connection of Bender isoData devices to Ethernet-TCP/IP networks Range of functions Basic device (without function modules) • Condition Monitor with a web interface for use with Bender isoData and BCOM as well as universal measuring devices. • Support for devices that are connected – via IsoData (1 device per interface), – via the BCOM interface (see the BCOM operating manual), – via Modbus TCP (max. 247 devices). • Remote display of present measured values, operating status and alarm messages. COMTRAXX® COM465ID Device features •...

Open the catalog to page 2

Function module B • Supports external applications (e.g. visualisation programs or PLCs) by means of the Modbus TCP protocol. Examples: • To write parameters via Modbus, the function modules B and C are required. • Reading the latest measured values, operating status and alarms messages from all assigned devices. Uniform access to all assigned devices by means of Modbus TCP via an integrated server. • To read parameters via Modbus, the function module B is required. • Control commands: From an external application (e.g. visuali sation software or PLC), commands can be sent to devices by...

Open the catalog to page 3

Operating controls and connections 1 - “ON” LED: Flashes during start-up. The LED lights permanently as soon as the device is ready for operation. 6 - Ethernet port (RJ45) for connection to the PC network as well as BCOM (X2 plug) 2 - LEDs show activities on the different interfaces 8 - IsoData 2 terminating resistor switch 3 - Voltage supply: see nameplate and ordering details 9 - Micro-USB interface (without function) (X3 plug) 4 - IsoData 1 interface (X1 plug) 10 - Mini-HDMI interface (without function) (X4 plug) 5 - IsoData 2 interface (X1 plug) 7 - IsoData 1 terminating resistor swit

Open the catalog to page 4

Technical data Insulation coordination acc. to IEC 60664-1/IEC 60664-3 (For 230 V variants B95061070) Rated voltage AC 250 V Rated impulse voltage/Overvoltage category 4 kV/III Pollution degree 3 Protective separation (reinforced insulation) between (A1/+, A2/-) - [(AMB, BMB), (ABMS, BBMS), (X2)] Supply voltage Supply voltage US Frequency range US Power consumption see ordering details see ordering details see ordering details Indication LEDs: ON ETHERNET IP ISODATA1 ISODATA2 Ethernet (X2 terminal) operation indicator data traffic Ethernet data traffic ISODATA1 data traffic ISODATA2 lights...

Open the catalog to page 5

Ordering details Supply voltage/Frequency range US AC/DC 24…240 V, 50…60 Hz Power consumption Condition Monitor with an integrated gateway: Bender system/Ethernet Function modules Modbus TCP server for max. 98 * 139 BMS nodes as well as BCOM and universal measuring devices, SNMP server Parameter setting of BMS devices as well as BCOM and universal measuring devices Visualisation of Bender systems, System visualisation Virtual devices Integrating third-party devices Individual texts for devices/channels, device failure monitoring, e-mail in case of an alarm Function module (software

Open the catalog to page 6

Application example ETHERNET/IP ISODATA 1 ISODATA 2

Open the catalog to page 7

BENDER Group COM465ID_D00368_01_D_XXEN/11.2018 / pdf / © Bender GmbH & Co. KG, Germany – subject to change! The specified standards take into account the edition valid until 11.2018 unless otherwise indicated. Bender GmbH & Co. KG P.O. Box 1161 • 35301 Grünberg • Germany Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-mail: info@bender.de

Open the catalog to page 8

COMTRAXX® COM465ID 8Pages

Catalog excerpts

All BENDER catalogs and technical brochures

COMTRAXX® COM465ID
8Pages