Catalogs >
BENDER >
COMTRAXX® COM465DP

COMTRAXX® COM465DP
8Pages

Catalog excerpts

COMTRAXX® COM465DP Condition monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks

Open the catalog to page 1

Condition monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks Product description The COMTRAXX® COM465DP series features a condition monitor and is integrated into the existing EDP structure like any Ethernet-capable device. All Bender devices can be connected via the integrated interfaces. In addition, third-party devices can also be integrated into the system. The measured values, parameters and all other data can be checked and parameterised via the web interface or the display. It is possible to indicate and visualise alarms....

Open the catalog to page 2

Function module A • Allocation of individual texts for devices, channels (measuring points) and alarms. Function module D Quick and easy-to-create visualisation of the system. Integrated editor provides access to a variety of widgets and functions. • Device failure monitoring • Display on up to 50 overview pages, where e.g. room plans can be stored. Navigation within these overview pages is possible. • E-mail notification in the event of alarms or system faults to different users. • Device documentation of any device in the system can be generated.* This contains all associated parameters...

Open the catalog to page 3

Operating controls and connections 1 - “ON” LED: Flashes during start-up. The LED lights permanently as soon as the device is ready for operation. 2 - LEDs show activities on the different interfaces 3 - Supply voltage: see nameplate and ordering information 4 - Connection PROFIBUS DP 5 - Modbus/RTU interface: Terminals AMB and BMB (plug X1) 6 - BMS bus (Bender measuring device interface): Terminals ABMS and BBMS (plug X1) 7 - Ethernet port (RJ45) for connection to the PC network as well as BCOM (plug X2) 8 - Modbus RTU terminating resistor switch 9 - BMS bus terminating resistor switch 10...

Open the catalog to page 4

Technical data Insulation coordination acc. to IEC 60664-1/IEC 60664-3 Rated voltage AC 250 V Rated impulse voltage/overvoltage category 4 kV/III Pollution degree 3 Protective separation (reinforced insulation) between (A1/+, A2/-) - [(AMB, BMB), (ABMS, BBMS), (X2), (X3, X4)] Supply voltage Supply voltage Us Frequency range Us Power consumption see ordering information see ordering information see ordering information Indications LEDs: ON PROFIBUS ETHERNET IP MODBUS RTU BMS Ethernet (terminal X2) operation indicator data traffic PROFIBUS DP data traffic Ethernet data traffic Modbus data...

Open the catalog to page 5

Technical data (continuation) Environment/EMC EMC Ambient temperatures Operating temperature Transport Long-term storage Classification of climatic conditions acc. to IEC 60721 Stationary use (IEC 60721-3-3) Transport (IEC 60721-3-2) Long-term storage (IEC 60721-3-1) Mechanical conditions acc. to IEC 60721: Stationary use (IEC 60721-3-3) Transport (IEC 60721-3-2) Long-term storage (IEC 60721-3-1) Connection Connection type Push-wire terminal X1 Conductor sizes Stripping length rigid/flexible flexible with ferrule without plastic sleeve flexible with ferrule with plastic sleeve pluggable...

Open the catalog to page 6

Application example Visualisation Integrated functions E-Mail notiﬁcation Backups Documentations Parameter Data transfer … Additional hardware necessary Solution for BACnet Solution for OPC …

Open the catalog to page 7

BENDER Group COM465DP_D00216_09_D_XXDEN / 02.2022 / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 02.2022 unless otherwise indicated. Bender GmbH & Co. KG Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • info@bender.de • www

Open the catalog to page 8

COMTRAXX® COM465DP 8Pages

Catalog excerpts

All BENDER catalogs and technical brochures

COMTRAXX® COM465DP
8Pages