Measuring current transformers of the WS..., WS...-8000 series

Measuring current transformers of the WS..., WS...-8000 series Product description WS... and WS...-8000 series split-core type measuring current transformers can be opened using the interlock knob to enclose the conductors to be monitored. That allows easy retrofitting in existing installations. WS... und WS...-8000 series measuring current transformers are highly sensitive measuring current transformers of split-core type which in combination with RCM and RCMS series residual current monitors and evaluators convert AC currents into evaluable measurement signals. In addition, the measuring current...

WS..., WS.-8000 series measuring current transformers Technical data Rated insulation voltage 800 V Rated impulse voltage/pollution degree 8 kV/3 Rated primary residual current Rated secondary residual current Rated transformation ratio Kn Rated burden Nominal power Frequency range Rated continuous thermal current /cth Rated short-time thermal current /th Rated dynamic current /dyn Rated primary residual current Rated secondary residual current Rated transformation ratio Kn Frequency range Rated continuous thermal current /cth Rated short-time thermal current /th Rated dynamic current /dyn Selection...

Installation instructions • Do not pass shielded cables through the measuring current transformer. • As a general principle, the PE conductor and low-resistance conductor loops must not be passed through the measuring current transformer! It is important that the leads are passed through the measuring current transformer in the right direction * Distance to the 90° angle = 2 x transformer height Bender GmbH & Co. KG Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • [email protected] • www.bender.de BENDER Group WS(-8000)_D00077_04_D_XXEN / 08.2021 / © Bender GmbH & Co. KG, Germany...