AT series panels Luminous display signs

Over door signs Display signs Luminous display signs Application Luminous display panels with information on room occupancy or usage indication in the medical sector and other industrial or building sectors. These signs are often located above the entry doors to prevent unintentional entry. Description The AT-series display panels may be equipped with different coloured lenses and text. Various types of enclosures and mounting options are available. Flush-mounting enclosure with aluminium bezel frame Surface mounted aluminium enclosure • Flush mounting wall box with bezel frame The silver coloured...

Typical Application • Hospitals or doctor offices with - laser- X-ray department • Technical testing laboratories • Radio and recording studios • Conference and seminar rooms • Waiting rooms • Controlled areas Typical individual lettering • Controlled area no access • Caution voltage • Caution test running • Quiet please • Film running • Please enter quietly performance running. • Next please • Please enter • Radiation protection area Do not enter • Secure area No access Technical Data Electrical data Lamp type Power consumption Conductor cross section Protection class LED strip, 102 LEDs white...

Overview of possible variations Example: Flush mounting enclosure, Article No. B22301032 with lens/screen Article No. B22302120 Mounting holes may be drilled into the sides or the rear as per site requirements. Example: Surface mounted enclosure, Article No. B22301038 with lense/screen Article No. B22302120 Mounting via predrilled holes at the rear side of the enclosure. Example: Partially surface mounting Article No. B22301030 with lens/screen Article No Article No. B22302121 Mounting in a standard one-gang junction box for cavity wall installation. *) Example: Ceiling mounting in a one-gang...

Rontgen 'Rontgen” with pictogram, red 'Laser” with pictogram, yellow Individual lens Note: A ceiling mounted enclosure requires two lenses/screens ! Additional Information Standard circular 68 mm one-gang junction box for cavity wall mounting is not included in delivery.

BENDER Group AT-series-panels_D00181_03_D_XXEN / 09.2019 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 09.2019 unless otherwise indicated. Bender GmbH & Co. KG Postfach 1161 • 35301 Grünberg • Germany Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected]