EDS3090/-91/-92/-96 Portable equipment for insulation fault location for energised and deenergised AC and DC systems Image similar

Device features • Portable insulation fault location systems for IT systems AC 0.. .790 V, 42...460 Hz/DC 0.960 V or deenergised systems • Residual current measurement in TN/TT systems • Use in main and control circuits, photovoltaic systems • Measuring clamps 20/52 mm (115 mm optional) • Robust aluminium case, convenient to carry • Locating current injectors PGH18. with variable locating current 1.25 mA • Integrated locating voltage for deenergised systems (PGH186) • Backlit LC display, 3 x 16 characters • Measuring clamps 20/52 mm included in the scope of delivery • Accumulator (delivered with...

Insulation fault location equipment type list Residual current measurement is possible in TT and TN systems (earthed systems) using the device variants listed below. The following overview describes which tasks can be done with which Equipment for insulation fault location in main circuits 1. Permissible system voltage in the main circuits: • Insulation fault location in IT systems up to AC 42...460 Hz, • Insulation fault location using AGE185 up to AC 42.460 Hz, 500.790 V and DC 400.960 V • Can be used in IT systems in which a locating current injector (e.g. PGH471) or an ISOMETER® with integrated...

Application example Equipment for insulation fault location EDS3096PG in de-energised systems (IT systems) (Note: can also be used in TN systems with all poles disconnected) Residual current measurement with EDS309… in earthed systems (TN-S systems)

Insulation fault location system EDS3096PV in unearthed photovoltaic systems (IT systems) Strings Junction box Inverter higher voltage: Equipment for insulation fault location EDS3090/3091PG for use in unearthed systems (IT systems) without a permanently installed equipment for insulation fault location

Display and operating elements of the PGH18... 1

Display and operating elements of the EDS195P(M) 1 Control buttons Select the operating mode: IAL Insulation fault location in IT systems IAn Residual current measurement in TN-S HOLD Save the measured value. a Move up in the menu, increase parameter values. RESET Delete fault memory. v Move down in the menu, reduce parameter values. Select current transformer: INFO Display device info: • device type, date, time, manufacturer • software version • Actual response values IAL and IAn • status word (setup status) ESC Leave a menu function without changing parameters. MENU Open the menu. OK Accept...

Technical data Technical data EDS309… system Environment/EMC EMC Operating temperature Climatic classes acc. to IEC 60721: Stationary use (IEC 60721-3-3) Transport (IEC 60721-3-2) Long-term storage (IEC 60721-3-1) Classification of mechanical conditions acc. to IEC 60721: Stationary use (IEC 60721-3-3) Transport (IEC 60721-3-2) Long-term storage (IEC 60721-3-1) Other Operating mode Position in normal use Weight EDS309… Weight EDS309… with PSA3165 Weight EDS3092 Dimensions, case W × H × D Technical data PGH18… Insulation coordination according to IEC 60664-1 / IEC 60664-3 Rated voltage Rated surge...

Technical data measuring clamps Other Degree of protection of built-in components DIN EN 60529 (VDE 0470-1) IP40 Protective class according to IEC 60947-1, DIN EN 60947-1 (VDE 0660-100) III Enclosure material ABS plastic Flammability class UL 94 V-0 Weight ≤350 g Software version D399 V2.1 Dimensions W × H × D 84 × 197 × 30 mm Technical data AGE185 Insulation co-ordination according to 60664-1 Rated insulation voltage Rated impulse voltage Degree of pollution Nominal system voltage Un Other Degree of protection of built-in components DIN EN 60529 (VDE 0470-1) IP30 Connection type/wire Safety...

Aluminium case

Ordering details

Device selection for IT systems with integrated equipment for insulation fault location ISOMETER® insulation monitoring devices with integrated locating current injector Insulation fault locator Measuring clamps

Complete systems Device selection for IT systems without a permanently installed equipment for insulation fault location Locating current injector PGH Insulation fault locator Measuring clamps

Component list © Bender GmbH & Co. KG, Germany Subject to change! The specified standards take into account the edition valid until 06.2025 unless otherwise indicated. RBENDERBender GmbH & Co. KG Londorfer StraGe 65 35305 Grunberg Germany