Isolating transformer DS0107 Three-phase isolating transformers for the supply of three-phase loads in medical locations

Isolating transformer DS0107 Three-phase isolating transformers for the supply of three-phase loads in medical locations Device features • Built-in temperature sensors acc. to DIN 44081 (120 °C) • Screen winding with brought-out insulated connection terminal • Insulated mounting angles • Degree of protection, IP00 (open design) • Degree of protection, IP23 (with enclosure) (option: encapsulated version) • Reinforced insulation • Connections: screw terminals (no-load and nominal load) The transformers of the DS0107 series have reinforced insulation and comply with the requirements of IEC 61558-1/DIN...

Dimension diagram/type of construction K series All other dimensions correspond to the standard dimensions.

Wiring diagram Terminal diagram Standard, K series, LG series Input terminals flexible/rigid 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 16/25 mm² Screen winding flexible/rigid 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 16/25 mm² Control terminals flexible/rigid 2.5/4 mm² 2.5/4 mm² 2.5/4 mm² 2.5/4 mm² 2.5/4 mm² 2.5/4 mm² 2.5/4 mm² Output terminals flexible/rigid 10/16 mm² 10/16 mm² 10/16 mm² 10/16 mm² 16/25 mm² 16/25 mm² 16/25 mm² Technical data Type Insulation classification Degree of protection Protection class Power/voltages/currents Rated power Rated frequency...

Isolating transformer enclosure Sheet steel enclosure in vertical position for three-phase transformers DS0107/2000 to DS0107/5000. Sheet steel enclosure in vertical position for three-phase transformers DS0107/6300 to DS0107/10000. • Sheet steel, varnished in RAL 7032 • Bore holes for cable entry • The enclosures of our transformers (standard version), transformer sizes of 2...10 kVA, are provided with fixing holes intended for easy retrofitting at any time. Suitable for the following device types

BENDER Group DS0107_D00105_00_D_XXEN / 05.2015 / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the version that was valid at the time of printing. Bender GmbH & Co. KG Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • [email protected] • www