*mydirectindustry

DI-2USB

Product catalog summary

Product Description: The DI-2USB interface converter facilitates the connection of PCs and workstations to Bender devices using an RS-485 interface via USB. It allows integration into a BMS network without altering the computer's hardware or software.

Application: The converter is used for converting USB interfaces to RS-485, parameterizing alarm indicator panels (MK800, MK2430), and Modbus RTU devices through software.

Functional Description: The DI-2USB connects devices with USB interfaces to the BMS bus, enabling evaluation and parameterization of BMS bus and Modbus RTU devices. It features galvanic separation to protect against voltage spikes.

Device Features: The converter includes a plastic enclosure, galvanic separation, USB-powered operation, and comes with a USB cable and driver CD.

Technical Data:

Insulation coordination: Rated voltage 3 kV, pollution degree 3.
Supply voltage: Powered via USB, 95 mVA power consumption.
RS-485 Interface: Baud rate 9.6 to 115.2 kbit/s, cable length up to 1200 m, integrated terminating resistors.
USB Interface: Includes alarm LEDs for status indication.
Environmental Conditions: Operating temperature -10 to +55 °C, EMC standards EN 61000-6-2/EN 61000-6-4.
Mechanical Conditions: Suitable for various mounting positions, including DIN rail mounting.

Ordering Details: The DI-2USB is available under Art. No. B 9501 2045, requiring no additional power supply.

Manufacturer Information: Bender GmbH & Co. KG, located in Grünberg, Germany, provides contact details for further inquiries.

Catalog excerpts

Device features • Plastic enclosure • Galvanic separation between the input and output circuit • Power supply via USB port • USB cable and driver CD included in the scope of delivery _ Z BENDERinterface converter USB to RS-485Product description The DI-2USB interface converter is designed for connecting PCs and work stations via the USB interface to Bender devices utilising an RS-485. The hardware and software of the computers do not need to be changed. A personal computer can be connected to a BMS network via the DI-2USB converter, for example. • Conversion of USB interface into RS-485 interface...

Open the catalog to page 2

Wiring diagram (example BMS) Technical data Insulation coordination acc. to IEC 60664-1 DI-2USB to connect a personal computer utilising a USB interface to a BMS network. Ordering details Rated voltage Rated impulse voltage/pollution degree 3 kV/3 Supply voltage Us see ordering details Baud rate 9.6...115.2 kbit/s Cable (twisted in pairs, one end of shield connected to pe) recommended: J-Y(St)Y min. 2x0.8 Integrated terminating resistors, selectable via jumper, factory setting terminating resistors included Device address - Alarm LEDs ON (yellow), R x Data (green), T x Data (red) Classification...

Open the catalog to page 3

BENDER Group DI-2USB_D00103_01_D_XXEN / 05.2019 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 05.2019 unless otherwise indicated. Bender GmbH & Co. KG P.O. Box 1161 • 35301 Grünberg • Germany Londorfer Straße 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-mail: [email protected]

Open the catalog to page 4

DI-2USB

DI-2USB

Catalog excerpts

All BENDER GmbH & Co KG catalogs and technical brochures