COMTRAXX® COM465ID Condition Monitor with integrated gateway for the connection of Bender isoData devices with Ethernet TCP/IP networks

COMTRAXX® COM465ID Condition Monitor with integrated gateway for the connection of Bender isoData devices with Ethernet TCP/IP networks Device features • Condition monitor for Bender systems • An integrated modular gateway between the Bender system and TCP/IP allows remote access via LAN, WAN or Internet • Features adaptable by means of the function modules • Ethernet (10/100 MBit/s) for remote access via LAN, WAN or Internet • Support of devices that are connected via isoData, BCOM or Modbus TCP Intended use The gateway connects the following devices to Ethernet TCP/IP networks: • Bender devices...

• Condition monitor with a web interface for use with Bender isoData and BCOM devices as well as universal measuring devices - via isoData (one device per interface) - via BCOM interface (max. 139 devices with one gateway / max. 98 x 139 devices in an interconnection with other gateways) • Remote display of present measured values, operating/alarm messages • Gateway to Modbus TCP: Reading the latest subsystem measured values, operating status and alarm messages from addresses 1...10 via Modbus TCP 11 • Ethernet interface with 10/100 MBit/s for remote access via LAN, WAN or the Internet • Time...

Connections and control elements

Technical data Insulation coordination in acc. with IEC 60664-1/IEC 60664-3 Rated impulse withstand voltage/ 4 kV / III overvoltage category Supply voltage Supply voltage Us Frequency range Us Power consumption Connection Cable length Data rate HTTP mode DHCP U (DHCP) nnn.nnn.nnn.nnn can always be reached via Netmask Protocols (depending on function module selected) 10/100 MBit/s, autodetect HTTP/HTTPS (HTTP)* on/off (on)* 5.60 s (30 s)* (192.168.0.254)* 169.254.0.1 nnn.nnn.nnn.nnn (255.255.0.0)* TCP/ IP, Modbus TCP, DHCP, SMTP, NTP, OPC-UA LEDs ON BCOM ISODATA 1 ISODATA 2 operation indicator...

Ambient temperatures Operating temperature Transport Long-term storage Conductor sizes Stripping length rigid/flexible flexible with ferrule without plastic sleeve flexible with ferrule with plastic sleeve Classification of climatic conditions acc. to IEC 60721 Other Operating mode Mounting position Connection Connection type pluggable push-wire terminals Push-wire terminals Degree of protection, internal components (IEC 60529) Degree of protection, terminals (IEC 60529) Snap-on mounting on a DIN rail Screw mounting Type of enclosure Enclosure material Flammability class Dimensions (W x H x D)...

Standards, approvals and certifications Ordering information

Application example Bender GmbH & Co. KG Londorfer Straße 65 35305 Grünberg Germany Tel.: +49 6401 807-0 [email protected] www.bender.de © Bender GmbH & Co. KG, Germany Subject to change! The specified standards take into account the edition valid until 05.2024 unless otherwise indicated.