*mydirectindustry

Catalogs
BENDER GmbH & Co KG
COMTRAXX® COM463BC

COMTRAXX® COM463BC

Product catalog summary

Device Features
The COM463BC is a gateway designed for data exchange between BCOM interfaces and external Building Management Systems (BMS). It supports Ethernet connectivity for remote access and features a web interface for configuration. The device can manage up to 255 BCOM devices and 99 external BMS systems, with capabilities for remote display of measurements and alarm notifications via email.

Intended Use
The device facilitates communication between BCOM and external BMS systems, allowing for configuration and selective alarm notifications. It supports remote diagnostics and maintenance.

Functionality
COM463BC integrates into existing network structures, enabling access to system devices via web browsers like Microsoft Edge, Mozilla Firefox, and Google Chrome.

Connections and Control Elements
The device includes power supply terminals, BMS bus connections, Ethernet ports, and LED indicators for operational status and data traffic.

Technical Data
The device operates on a supply voltage of AC/DC 24-240 V, with a power consumption of ≤ 6.5 VA / ≤ 4 W. It supports various environmental conditions and complies with EMC standards EN 61326-1. The device features pluggable push-wire terminals for connections.

Standards and Certifications
The COM463BC complies with IEC 60664-1/IEC 60664-3 for insulation coordination and other relevant standards for environmental and mechanical conditions.

Ordering Information
The device is available under the model number COM463BC-230V, suitable for systems requiring BCOM and external BMS connectivity.

Catalog excerpts

COMTRAXX® COM463BC Gateway for data exchange between the interfaces BCOM and external BMS

Open the catalog to page 1

Device features • Gateway for data exchange between the interfaces BCOM and external BMS • Ethernet (10/100 Mbit/s) for remote access via LAN, WAN or the Internet • Gateway with web interface • Data exchange between devices at the following interfaces: • Remote display of present measured values and operation/alarm messages • Ethernet interface with 10/100 Mbit/s for remote access via LAN, WAN or the Internet • Assignment of individual texts for devices, channels (measuring points) and alarms • Device failure monitoring • E-mail notifications to various users in the event of alarms and system...

Open the catalog to page 2

Connections and control elements

Open the catalog to page 3

Wiring diagram Wiring diagram COM463BC (example)

Open the catalog to page 4

Technical data Insulation coordination in acc. with IEC 60664-1/IEC 60664-3 Rated impulse withstand voltage/ 4 kV / III overvoltage category Protective separation (reinforced (A1/+, A2/-) - [(ABMS, BBMS), (X2)] insulation) between Ambient temperatures Operating temperature Transport Long-term storage Classification of climatic conditions acc. to IEC 60721 Supply voltage Supply voltage Us Frequency range Us Power consumption Connection type pluggable push-wire terminals BCOM data traffic BCOM Ethernet (terminal X2) lights during network connection flashes during data transfer Push-wire terminals...

Open the catalog to page 5

Ordering information Device

Open the catalog to page 6

The COM463BC communicates via the following interfaces: • BCOM (Ethernet) External panel interface (external BMS) / RS-485 Control Panel Power Quality Control Panel E& BENDERBender GmbH & Co. KG Londorfer StraGe 65 35305 Grunberg Germany © Bender GmbH & Co. KG, Germany Subject to change! The specified standards take into account the edition valid until 05.2024 unless otherwise indicated.

Open the catalog to page 7

COMTRAXX® COM463BC

COMTRAXX® COM463BC

Catalog excerpts

All BENDER GmbH & Co KG catalogs and technical brochures