Power supply unit AN410for DC 24 V power supplyCP-D 24/0.42 • DC LOW

Power supply unit AN410 Device features • Primary-pulsed power supply unit for the power supply of Bender devices with a supply voltage of DC 24 V and a power consumption of max. 10 VA • Power supply for max. 3 MK2430/max. 2 MK800 alarm indicator and test combinations _ Z BENDER for DC 24 V power supply The primary-pulsed power supply unit AN410 is suitable for the supply of Bender devices with a supply voltage of DC 24 V and a total power consumption of 10 VA. A maximum of three MK2430 or two MK800 alarm and test combinations can be supplied, for example. The supply voltage Uin is to be connected...

Power supply unit AN410 Power On LED "DC ON" lights up green signalling that voltage is available at the output of the power supply unit. LED "DC LOW" lights red signalling that the output voltage is too low. Technical data Insulation coordination acc. to IEC 60664-1 Rated impulse voltage/pollution degree 3 kV/2 Rated insulation voltage U input circuit/output circuit 3 kV Wiring diagram Input circuits see ordering information < 3 W < 30 A, < 3 ms > 30 ms 184 mA/11.62 W 120.6 mA/12 W 1 A time-lag/AC 250 V Rated input voltage UIN Power consumption Inrush current Stored energy time in the event...

BENDER Group AN410_D00099_00_D_XXEN / 04.2014 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the version that was valid at the time of printing. Bender GmbH & Co. KG P.O. Box 1161 • 35301 Gruenberg • Germany Londorfer Strasse 65 • 35305 Gruenberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected] • w