The Power in Electrical Safety® Power supply unit AN111 for DC 24 V power supply

Power supply unit AN111 _ Z BENDER with a supply voltage of DC 24 V The compact switched-mode power supply unit AN111 is used to supply Bender devices with a supply voltage of DC 24 V and a total power consumption of 24 watts. By means of an AN111, Bender devices can be operated in 400 V systems (L1-L2). The supply voltage Uin is connected to the terminals L1/L2. The output voltage of DC 24 V is available across the terminals +/-. Fuses are built in exclusively for short-circuit protection guaranteeing safe operation even under worst-case conditions. The rated current specified for the AN111...

Power supply unit AN111 Technical data Input circuit Mains input voltage Input voltage range Frequency Mains fuse AC 400 V Ordering information Dimension diagram Dimensions in mm Output circuit Output voltage EN 61131-2/Part 2 Status indicator Time-lag fuse, output Permissible continuous output current Residual ripple Ambient temperature Output proctection circuit DC 24 V, on double terminals LED green 5 x 20 mm 1.25 A 24 W DC 1A < 5 % -10...+60 °C varistor Connection Connection screw mounting, touch proof according to UVV (BGV A3) (German accident prevention regulation) Connection properties...

P.O. Box 1161 • 35301 Gruenberg • Germany Londorfer Strasse 65 • 35305 Gruenberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected] • www.bender.de BENDER Group TDB203012en / 05.2013 / pdf / © Bender GmbH & Co. KG, Germany - Subject to change! The specified standards take into account the version that was valid at the time of printing.