*mydirectindustry

AN110

Product catalog summary

Product Description: The AN110 power supply unit is designed to supply W…AB series measuring current transformers with a symmetrical DC ±12 V supply voltage using a WXS… series connecting cable. It can support up to six transformers, but only five if the supply voltage is below 30 V.

Wiring Diagram: The unit includes a supply voltage (US) and short-circuit protection with recommended fuses: 2A time-lag for AN110-1 and 1A time-lag for AN110-2. The connecting cable has color-coded conductors: yellow (k1), green (l), black (-12 V), brown (GND), and red (+12 V).

Insulation Coordination:

AN110-1: Rated insulation voltage of AC 100 V, impulse voltage of 2.5 kV, and a voltage test of 3.3 kV.
AN110-2: Rated insulation voltage of AC 250 V, impulse voltage of 4 kV, and a voltage test of 3.3 kV.

Supply Voltage:

AN110-1: AC 20-60 V, DC 18-72 V, frequency 50-60 Hz, power consumption ≤ 30 VA.
AN110-2: AC 90-264 V, DC 100-353 V, frequency 50-60 Hz, power consumption ≤ 30 VA.

Output Power Supply Unit: Provides a DC ±12 V output voltage, short-circuit proof, with an operating range of 11.5-12.5 V and a rated output of 12 W.

Environmental and EMC Standards: Complies with EMC standards DIN EN 61000-6-3 and DIN EN 61000-6-2. Operating temperature ranges from -25 to +65 °C with derating above 50 °C.

Mechanical and Connection Details:

Connection via screw-type terminals supporting various conductor sizes.
Continuous operation mode with IP65 protection for internal components and IP20 for terminals.
Enclosure made of PBT material, suitable for DIN rail mounting.

Ordering Information: Includes part numbers for different supply voltage types and connecting cable lengths ranging from 1 m to 10 m.

Catalog excerpts

The Power in Electrical Safety® Power supply unit for measuring current transformers tfww bender de coni Ausgangsspannung / Output voltage GND Ausgangsstrom / Output current Supply voltage Datenblatl / Data sheet RoHS Werk-Ni

Open the catalog to page 1

Power supply unit for measuring current transformers Product description The power supply unit AN110 is used to supply W...AB series measuring current transformers. The CTs are to be supplied with a symmetrical supply voltage of DC ± 12 V using a prefabricated WXS... series connecting cable. The power supply unit is capable of supplying up to six W...AB series measuring current transformers. When the supply voltage is smaller than 30 V, the output power is reduced, so that only five measuring current transformers can be connected. Klemmleiste terminal block 1 - Supply voltage Us AN110-1: 2A time-lag...

Open the catalog to page 2

Power supply unit AN110 Technical data Insulation coordination acc. to IEC 60664-1/IEC 60664-3 AN110-1: Rated insulation voltage AC 100 V Rated impulse voltage/pollution degree 2.5 kV/3 Protective separation (reinforced insulation) between (A1, A2) - (+12 V, GND, -12 V) Voltage test acc. to IEC 61010-1 3.3 kV Rated insulation voltage AC 250 V Rated impulse voltage/pollution degree 4 kV/3 Climatic class acc. to IEC 60721: Stationary use (IEC 60721-3-3) Transport (IEC 60721-3-2 Long-time storage (IEC 60721-3-1 3K5 (except condensation and formation of ice) 2K3 (except condensation and formation...

Open the catalog to page 3

Bender GmbH & Co. KG P.O. Box 1161 • 35301 Gruenberg • Germany Londorfer Strasse 65 • 35305 Gruenberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected] • www.bender.de BENDER Group AN110_D00097_00_D_XXEN / 12.2017 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 12.2017 unless otherwise indicated.

Open the catalog to page 4

AN110

AN110

Catalog excerpts

All BENDER GmbH & Co KG catalogs and technical brochures