Coupling device AGH676S-4 EfcBENDER Ankopplungsgorai Typ AGH676S-4 Achtung Hochspannung Danger High Voltage

Product description The coupling device AGH676S-4 series is designed to extend the nominal voltage range to AC, 3(N)AC 0…12 kV, 50…460 Hz for the ISOMETER® iso685… series and IRDH275-4xx/ IRDH375-4xx/IR420-D64. Approvals Ordering information Nominal system voltage Un AC, 3(N)AC 0…12 kV, 50…460 Hz Wiring diagram offline (IR420-D64) Cable length Wiring diagram online (iso685/IRDH275-4xx/IRDH375-4xx)

AC Technical data Insulation coordination acc. to IEC 61800-5-1 Connection Rated insulation voltage Type test Voltage impulse test AC voltage test Partial discharge test Routine test AC voltage test, rate of increase < 2 kV/s Nominal system voltage Un Nominal frequency fn Internal DC resistance Ri Impedance Zi at 12 kV and 50 Hz Environmental conditions Connection medium voltage high-voltage cable (encapsulated on the device side) Connection, flexible with ring terminal M8 Connection terminals 3, 4, 5 screw terminals Connection properties Other Operating mode Position Degree of protection, internal...

BENDER Group AGH676S-4_D00096_02_D_XXEN / 08.2019 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 08.2019 unless otherwise indicated. Bender GmbH & Co. KG P.O. Box 1161 • 35301 Gruenberg • Germany Londorfer Strasse 65 • 35305 Gruenberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected] • w