E& BENDER The Power in Electrical Safety6

Coupling device AGH575S-6 Product description The AGH575S-6 coupling device is designed to extend the nominal voltage range of the ISOMETER® IRDH275BU-6 to AC /DC 0...3.6 kV. The coupling device is to be connected via one pole to the system to be monitored. Terminal 5 is to be connected to terminal AK of the ISOMETER®. Dimension diagram Ordering information L Aehtung Hochspannung L f Danger High Voltage f

AC/DC Wiring diagram Technical data continuous any position screw terminals 0.2.4 / 0.2...2.5 mm2 0.25.2.5 mm2 24-12 Insulation coordination acc. to IEC 60664-1 Rated voltage AC 3.6 kV AC voltage test, duration: 5 s AC 20 kV Nominal system voltage Un AC/ 3/(N) AC/ 0.. .3.6 kV Environmental conditions Shock resistance IEC 60068-2-27(device in operation) 15 g / 11 ms Bumping IEC 60068-2-29 (during transport) 40 g / 6 ms Vibration strain IEC 60068-2-6 (device in operation) 1 g / 10.150 Hz Vibration strain IEC 60068-2-6 (during transport) 2 g / 10.150 Hz Ambient temperature (device in operation)...

BENDER Group AGH575S-6_D00319_00_D_XXEN / 08.2019 / pdf / © Bender GmbH & Co. KG, Germany – Subject to change! The specified standards take into account the edition valid until 08.2019 unless otherwise indicated. Bender GmbH & Co. KG P.O. Box 1161 • 35301 Grünberg • Germany Londorfer Strasse 65 • 35305 Grünberg • Germany Tel.: +49 6401 807-0 • Fax: +49 6401 807-259 E-Mail: [email protected] •