*mydirectindustry

AGH150xx

Product catalog summary

Product Description
The AGH150W and AGH150W-4 are coupling devices designed to extend the nominal voltage range of the ISOMETER® iso685 series. They connect to the monitored system via two poles and to the ISOMETER® terminals AK or L1/L2/L3 using terminal AKxxx.

Standards and Approvals
The devices comply with DIN EN 45545-2 and DIN EN 50155 standards. The AGH150W-4 model has UL approval.

Technical Specifications

Insulation Coordination: AGH150W has a rated insulation voltage of AC 1000 V, while AGH150W-4 is rated at AC 1600 V. Both models have a pollution degree of 2.
Voltage Tests: AGH150W undergoes a voltage impulse test of ≥ AC 8 kV and an AC voltage test of ≥ AC 4.3 kV. AGH150W-4 undergoes a voltage impulse test of ≥ AC 11 kV and an AC voltage test of ≥ AC 6.6 kV.
Voltage Ranges: AGH150W supports AC 0…1150 V and DC 0…1100 V, while AGH150W-4 supports AC 0…1150 V and DC 0…1760 V (DC 0…1600 V for UL applications).
Environmental Conditions: Operating temperature ranges from -40 to +70 °C, with specific conditions for UL applications. The operating altitude is ≤ 2000 m AMSL.
Connection and Mounting: The devices use flat terminals and support rigid/flexible connections of 0.2…4/0.2…2.5 mm². They can be mounted in any position and are designed for continuous operation.
Protection and Compliance: Internal components have a protection degree of IP30, and terminals have IP20. The devices are mounted on a DIN rail according to IEC 60715 and have a flammability class of UL94 V-0.

Ordering Information
AGH150W (Art. No. B915576) and AGH150W-4 (Art. No. B98018006) are available for different nominal system voltages.

Manufacturer Information
Bender GmbH & Co. KG, located in Grünberg, Germany, is the manufacturer. Contact details include phone: +49 6401 807-0 and email: [email protected].

Catalog excerpts

Coupling device AGH150xx Product description The AGH150W or AGH150W-4 coupling device is designed to extend the nominal voltage range of the ISOMETER® iso685 series. The coupling device is connected to the system being monitored by two poles and connected to the terminal AK resp. L1/L2/L3 of the ISOMETER® by means of the terminal AKxxx. The AGH150W(-4) complies with the requirements of Ordering information Dimension diagram X150 Dimensions in mm

Open the catalog to page 2

Wiring diagram Technical data continuous operation any position < 10 W at DC 1760 V IP30 IP20 IEC 60715 UL94 V-0 < 900 g AGH150W-4 only Rated insulation voltage AC 1000 V Rated insulation voltage AC 1600 V Voltage impulse test (basic insulation) > AC 8 kV AC voltage test (basic insulation) > AC 4.3 kV Voltage impulse test (basic insulation) > AC 11 kV AC voltage test (basic insulation) > AC 6.6 kV Voltage ranges Nominal system voltage Un Frequency range of Un (sinus) Overvoltage category Rated impulse voltage Internal DC resistance Ri Tolerance of internal DC resistance R AGH150W-4 Nominal system...

Open the catalog to page 3

Bender GmbH & Co. KG Londorfer Straße 65 35305 Grünberg Germany Tel.: +49 6401 807-0 [email protected] www.bender.de © Bender GmbH & Co. KG, Germany Subject to change! The specified standards take into account the edition valid until 08.2023 unless otherwise indicated.

Open the catalog to page 4

All BENDER GmbH & Co KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list