Catalogs >
Beltron GmbH >
UV Laboratory dryer BE 20

UV Laboratory dryer BE 20
1Pages

Catalog excerpts

Application: For drying and polymerization of inks, coatings and glue, for printed circuit boards, laminated materials, plastic, paper, glass, metal and other printed materials in flow process. The lamp power lasts from 80 to 200W/cm and the machines are equipped with 1 or 2 uv lamps. This uv dryers are used for laboratory operation or small size production. Design: Teflon belt (ptfe-coated), with maintenance-free adjustable belt drive 0,5—12 m/min (optional other range), belt width 220 mm with 1 or 2 UV lamp units with special aluminum reflectors or (upon request) with selective filters for temperature reduction, entire lamp unit can be raised, with rollers or stand, Inlet and outlet for different materal height can be adjusted between 20 and 100 mm, working height according to SMEMA with stand, adjustable between 900 to 950 mm, with exhaust/cooling fan. Compact Control, display of various parameters such as UV set value, operating hours, lamp current. The Compact Control also controls the following tasks: lamp ignition, lamp fuses, idle run, overtemperature, exhaust air, converter, installed power 400V (other power optional). Technical Data: Tranport belt: Control: Bulb: Bulb filling: Bulb power: Machine dimensions: Working height: Installed power: Teflon belt Compact - PLC 1 or 2 uv lamps Hg (mercury), Fe (Iron) oder Ga (Gallium) 80 W to 200 W/cm 1100 x 1000 x 1200 mm (WxDxH) 900 to 950 mm 3 x 400 V / N / PE 50 Hz Beltron GmbH 63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29 Email: info@beltron.de Internet: www.beltron.de

Open the catalog to page 1

UV Laboratory dryer BE 20 1Pages

Catalog excerpts

All Beltron GmbH catalogs and technical brochures

UV Laboratory dryer BE 20
1Pages