UV-IR Laboratory dryer BE 20 Application: For drying and polymerization of uv screen inks, uv glue, for printed circuit boards, laminated materials, plastic, paper, glass, metal and other printed materials in flow process. The lamp power lasts from 80 to 200W/cm and the machines are equipped with 1 to 3 uv lamps. As well as to 3 IR modules. This uv dryers are used for laboratory operation or small size production. Design: Teflon belt (ptfe-coated) or stainless steel belt, belt width 200 mm with uv lamps , with special aluminum reflectorsmit or (upon request) with selective folters for temperature reduction, entire lamp unit can be raised 70 to 120 mm, dryer and electronic control can be moved due to rolls, inlet and outlet for different materals can be adjusted between 20 and 50 mm, steppless belt speed control in the range of 1,5-15 m/min (other ranges upon request), with exhaust/cooling fan, in combioperation the machine is equipped with mw infrared modules. Compact Control, display of various parameters such as UV set value, operating hours, lamp current. The Compact Control also controls the following tasks: lamp ignition, lamp fuses, idle run, overtemperature, exhaust air, converter, installed power 400V (other power optional). Technical Information: Belt: Control: Lamp: Lamp filling: Lamp power: IR-Moduls: Teflon or steel conventionel or PLC with touchscreen 1, 2 or 3 uv lamps Hg (Mercury), Fe (Iron) or Ga (Gallium) 80W to 200W/cm 1 to 3 MW IR-Modules Beltron GmbH 63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29 Email: [email protected] Internet: www.beltron.de