One-Sided continous-dryers Application: For drying and polymerization of uv screen inks, uv glue, for printed circuit boards, laminated materials, plastic, paper, glass, metal and other printed materials in flow process. Machines of BE type can be delivered with working width of 35 to 260 cm and lamp power of 80 to 200W/cm and can be equipped with 1 to 3 bulps. Design: Compact, space saving steel construction, belt speed 0,5 – 12 m/min stepless controllable (other ranges possible), electronical lamp cooling system, easy and fast lamp exchange, alu lamp casing with uv bulp with 120 W/cm caspacity with 50% load for energy saving, spezial refectors for optimal focusing of uv radiation, service and maintenance friendly design, exhaust air system with connection to exhaust pipe, additional air cooling system between the lamps for critical applications, Compact Control, display of various parameters such as UV set value, operating hours, lamp current. The Compact Control also controls the following tasks: lamp ignition, lamp fuses, idle run, overtemperature, exhaust air, converter. Optional equipent: selective filters, quartz glass for further reduction of product temperature, stepless power control in the range of 35-100% for optimal uv radiation as well as a SPS computer control. Special application uv dryers with 6-8 lamps are manufactured several times. Technical Information: Transportation belt: Teflon or metall Control: Conventionel or PLC with touchscreen Lamps: 1, 2 or 3 UV-Strahler Lamp filling: Hg (Mercury), Fe (Iron) oder Ga (Gallium) Lamp power: 80W up to 200W/cm Beltron GmbH 63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29 Email: [email protected] Internet: www.beltron.de