LED UV dryer BE 20 Application: UV-curing drying inks, printing inks, coatings, adhesives and other UV-sensitive materials by polymerization rather than evaporation of solvents. So far, conventional mercury UV lamps were used for the cure, but meanwhile, the efficient, environmentally friendly UV-LED technology is a proven and superior alternative. Unlike mercury vapor lamps, the LED curing use semiconductor-based LEDs to generate ultraviolet (UV) light. BELTRON relys on the UV-LED technology's advantages with maximized performance, reliability and UV energy. Design: The complete turnkey unit is equipped with a UV LED light irradiation unit. Since the heat generated during the UV-LED radiation is only 1 / 10 of the heat produced during the conventional UV irradiation, the cooling and exhaust fans consume less and accordingly less energy. The machine is designed for a working width of 20 cm . The lamp can be started and stopped instantly and therefore no shutter is required during production. The uv power is adjustable within 20 to 100%. Spectral distribution: Technical Information: Wave length: 365NM, 395NM UV-LED-Power: 1-8 W/cm² Radiation width: up to 225 mm Length: 1100 mm Depth: 1000 mm Height: 1200 mm Conveyor belt width: 220 mm Conveyor belt speed: 0,5-12 m/min Connection voltage: 230V / 50 Hz Beltron GmbH 63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29 Email: [email protected] Internet: www.beltron.de