LED-UV Chain Conveyor Range of use: With the LED-UV Chain Conveyor you can dry all UV-reactive materials like e.g. protection lacquers with thick layers, gluten, resins and UV-varnishes. So far conventional, mercurial UV-lamps are used for the hardening process, but in the meantime the more efficiently and environment friendly UV-LED-Technology represents a well-tried option. Different to quicksilver steam lamps, the LED- Hardening uses semiconductor LED’s for the generation of ultraviolet (UV) light. BELTRON use the advantages of the UV-LED-Technology with maximum of performance, reliability and UV-Energy. Design: The LED- Chain Conveyor convinces also by an individual adjustment in breadth (for PCB’s up to 240 x 400 mm) and height from 20 – 110 mm, an electric controlled cooling system, SPS computer control for surveillance and control of all functions of the device. As well a transport speed control, which is adapted to the cycle of production and the needed UV-dosage. In comparison with the common BELTRON UV-drier, the LED-UV Chain Conveyor offers a space saving isolated application on a tight area. Technical Information: Wave length: 365NM or 395NM UV-LED-Power: 1-12 W/cm² Breadth of radiation: up to 240 mm Length: 1700 mm Depth: 835 mm Height: 1640 mm Beltron GmbH 63322 Rödermark Telefon: 06074-89199-0 Telefax: 06074-89199-29 Email: [email protected] Internet: www.beltron.de