Beltrotherm DRYING OF PRINTED ELECTRONICS AND MEMBRAN SWITCHES BELTROTHERM PERFECT FIT FOR ALL SCREEN PRINTING MACHINES, FLEXIBLE FOR ALL PROCESSES! The BELTROTHERM continuous belt dryer particularly suitable for the drying of metal paste and isolation materials used in the production of printed electronics. The long-wave infrared radiation in combination with the convection air heat drying metallic pastes from inside to outside, thereby avoiding skin formation on the surface. Low resistance values of the tracks can be achieved already after one pass. On flat conveyor belt also thin films and substrates are transported safely through the heating zones. Process times of a few minutes secure a cost-effective process. Beltron GmbH Siemensstraße 6 | D-63322 Rödermark | Phone: +49 6074 89199-0 | [email protected] | www.beltron.de

Beltrotherm DRYING OF PRINTED ELECTRONICS AND MEMBRAN SWITCHES Technical Information Beltrotherm • Available modules: Belt speed: adjustable tranquilizers module Tack drying soldermask: 0,5 - 50,0 m/min. Curing soldermask: 0,2 - 2,0 m/min. heating module Curing paste: 0,5 - 5,0 m/min. cooling module Inlet / outlet, various PLC control: In the mobile console with touch- Connecting power per module: 9,3 kW / 18,6 kW Working power per module: 4,6 kW / 9,3 kW Supply air, exhaust air per Module 100 - 300 m³/h screen screen The Thermo-Dryer BELTROTHERM are used successfully in: printing industry, electronic...