Beltrotherm DRYING AFTER FULL SURFACE SCREEN PRINTING HORIZONTALLY OR VERTICALLY BELTROTHERM DRYING AFTER FULL SURFACE SCREEN PRINTING HORIZONTALLY OR VERTICALLY FOR MANY YEARS, PROVEN, UNIVERSALLY APPLICABLE Full surface screen printing Horizontal screen printed liquid coatings are manually or automatically fed to the pre-dryer BELTROTHERM. Depending on the required drying program evaporation and drying of the ink is made to the adhesive-free further processing. After double-sided screen printing the printed circuit board or substrate is transported on V-belt transport contact free and driven both sides at the same time through the evaporation and drying zone and dried very precisely. Beltron GmbH Siemensstraße 6 | D-63322 Rödermark | Phone: +49 6074 89199-0 | [email protected] | www.beltron.de

Beltrotherm DRYING AFTER FULL SURFACE SCREEN PRINTING HORIZONTALLY OR VERTICALLY Technical Information Beltrotherm • Available modules: Belt speed: adjustable tranquilizers module Tack drying soldermask: 0,5 - 50,0 m/min. Curing soldermask: 0,2 - 2,0 m/min. heating module Curing paste: 0,5 - 5,0 m/min. cooling module Inlet / outlet, various PLC control: In the mobile console with touch- Connecting power per module: 9,3 kW / 18,6 kW Working power per module: 4,6 kW / 9,3 kW Supply air, exhaust air per Module 100 - 300 m³/h screen screen The Thermo-Dryer BELTROTHERM are used successfully in: printing...