Copying unit for screen printing Beltroframe S Application: For exposure of screens from below. Design: Solid steel construction with fixed ESG glass , quick lockable top frame supported with throttle controls, rubber blanket with special surface with exhaust nozzles and cupper belt for anti-static-protection and reaching an even vacuum. The machine is equipped with an Instant Start Lamp Type BELTROLUX D 3000W, 5000 W oder 6000 W. By eliminating the stand-by-periods and together with the specially designed uv reflector an energy safing of up to 80% could be achieved. Best efficiency and exact exposure by utilization of ecologically beneficial lamps. Clear control panel with vacuum meter, vacuum valve, operation and control elements, high speed vacuum pump. The electronic components are installed service friendly on a switch board drawer. This design enables the operator to easy exchange the lamps, pump, or fan, if required. Technical Information Copying unit for screen printing Beltroframe S Standard: Lamp power insertion lamp, yellow Control computer BELTROMAT 8100 Stronger vacuum pump to reduce the vacuum time Special Sizes on request The Copying unit for screen printing Beltroframe are used successfully in: printing industry, electronic industry, packaging industry, and automotive industry. These are just a few examples from the various partner portfolio of Beltron. Beltron GmbH Siemensstraße 6 | D-63322 Rödermark | Phone: +49 6074 89199-0 | [email protected] | www.beltron.de