Copying unit for screen printing BELTROCOP S, suitable for all kinds of templates. Self-supporting all-steel model. Rubber cover with extremely hard surface with 2 or 4 exhaust nozzles (depending on size). Design: Upper frame supported by gas springs for quick-acting closure with a crystal glass pane free from reams. Lower part with 3 easy-to-pullout racks. Racks arched inside and designed so that the screens are only laid on the outside edges. Racks with nettle cloth prevent liquid dripping onto the screens underneath. The rack compartment can also be equipped as a drying cabinet. Well arranged control panel with vacuum gauge, vacuum reducing valve, operating and control elements. High-performance vacuum pump. The electric control units can be easily monitored on a control panel and facilitate easy maintenance. Standard voltage 400 V/50 Hz. Technical Information Copying unit for screen printing Beltrocop S Standard: Art.-No.: Lamp power Special Sizes on request Beltron GmbH Siemensstraße 6 | D-63322 Rödermark | Phone: +49 6074 89199-0 | [email protected] | www.beltron.de

Copying unit for screen printing BELTROCOP S, suitable for all kinds of templates. Self-supporting all-steel model. Rubber cover with extremely hard surface with 2 or 4 exhaust nozzles (depending on size). Technical Information Copying unit for screen printing Beltrocop S Options: Art.-No.: Lamp fixture with hand winch and stop Protective curtain with fixture for BELTROCOP S B3 Protective curtain with fixture for BELTROCOP S B2 Protective curtain with fixture for BELTROCOP S B1 Protective curtain with fixture for BELTROCOP S A0 Semi-automatic running, only vacuum and exposure time to be preset...