QUALITY AND INNOVATION IN THE COMPACT G.E. FAMILY FROM 7.7 KVA TO 20.0 KVA Main characteristics of gen. sets powered by Lister Petter Water cooled three-phase or single phase 1500 or 3000 rpm. To run these generators less fuel is needed than running most of equivalent engines by competitors. Easy cold stared, the engine is able to manage loads quickly and sturdy. First rank alternators driven from Lister Petter engines generates power going from 7.7 KVA to 20 KVA. Standard equipment for open gen. Set: Zink plated sheet base with crossbars, easy to move with the fork-lift on four sides; 66 liters polyethylene fuel tank fitted into the base; fuel lift pump, four vibration dampers, battery charge alternator, battery, starting engine 12 V; speed governor, residential silencer, lube oil first filling and cooling liquid first filling, manual control panel (see control panel instructions), control screen showing 15 parameters (see control panel instructions); safety devices: hot parts insulation, low oil pressure switch-off, engine high temperature switch-off, overload switch-off, short circuit switch -off . Canopy: The canopy has an exceptional little dimension (only mm 1693x743x1143) with a lifting hook on the top for easy moving in narrow spaces. The sound is deadened so efficiently that the generator can be placed in a residential area, and the canopy is designed for long lasting protection from weather. The iron sheet is 3 mm thickness and the base is made of zinc-plated sheet. The 3000-rpm version of the gen. set has a wider canopy. For rental: These machines are very easy to run, equipped with a last generation and complete control system that also a nonprofessional customer can use intuitively. They are fit for quick and agile rental to medium size power use. They can be lifted from four sides, and the hook on the top allows movement in narrow spaces. An outward socket board (optional) allows the customer to connect the load just inserting a plug. Optional devices: Some optional are available on request: low fuel level alarm, fuel pre-filter, water pre-heating, self-blocking-sockets board, automatic changeover control board, mains gen. set changeover-device in a separate metal box, power leakage stop switch, terminal box for connecting the loads, remote emergency push button, remote start by external signal. Engine main feature: Two cylinders, three cylinders and four cylinders are available, and a turbo charger version of the four cylinder too. Fit for heavy-duty work, these are all diesel engines, four stroke, water cooled, with counter-clockwise rotation (flywheel side). Mechanical speed governor class A1, dry air filter with changeable elements. BELTRAME CSE S.R.L. Via San Pio X, 104 | 35015 Galliera Veneta PD | beltramecse.com T.+39.049.5965127 | F.+39.049.9440024 | [email protected] C.f. eP.IVA IT04179700283

Engine standard equipment: Rim gear flywheel, flywheel housing SAE 5, suction and exhaust pipes, centrifugal oil separator filter, fuel agglomeration filter, air filter for prime usage, fuel lift pump, pre heater plug, engine oil low pressure protection switch, engine high temperature protection switch, starting engine, muffler with residential silencer. Operational conditions: Generators can work no stop within 52 C° environment temperature, the fuel lift pump is auto-ventilated to prevent depression into the fuel tank; each cylinder has a fuel injection pump. Engine water cooling is equipped...

CONTROL BOARD The control board in stainless steal has an upper box and a lower box. In the upper box there are the control panel, the display of the control system, the key, the emergency stop button; overall protection class IP44. In the lower box there are the Amp. transformers, the earth leakage-switch off , the clamps to connect the power cables, the clamps for ground connecting, the clamps for auxiliary connections; overall protection class IP20. Software main features. Microprocessor technology gives: parameters, alarms and stops automatic diagnostic; easy to read display on the control...