BelSonic SeamStar 150 Continuous ultrasonic sewing machine for cutting and/or welding of thermoplastic fabrics & films The BelSonic SeamStar BS 150 has a fixed horn on top of the machine and a pattern wheel inserted into the top surface of the working table. This will allow for easier access during precise hand guided operations. The BelSonic SeamStar BS 150 is equipped with an additional PLC control system that will : - allow the pattern wheel to return to its original starting point when being lifted up - will allow to work in distance mode where the machine will only perform a preset mm distance - with a fixed or variable pattern wheel speed : a variable pattern wheel speed means the operator increases the speed while pushing on the pedal during the operation Your advantages • Welds, cuts & seals, trims or embosses without thread, glue or other consumables • Quick and efficient : works up to four times faster than a traditional sewing machine • Interchangeable pattern wheels or roller that have a diameter of 100 mm • Provides a complete barrier seam for example for medical apparel • Continuous machine requiring only one pass through the machine • Cuts and seals simultaneously, thus eliminating fraying or unravelling of bonded edges and seams VERUS bvba Tel. 00 32 56 43 28 05 Vlamingstraat 4 Fax 00 32 56 41 76 36 8560 Wevelgem [email protected] Belgium www.belsonic-machines.com • Requires minimal operator training

Applications The BelSonic SeamStar BS 150 offers a production alternative for cutting and/or welding of synthetic fabrics. Materials best suited for ultrasonic bonding are made of 100% synthetic or thermoplastic fibres. Blends with a maximum of 40% natural fibres can possibly also be used. The BelSonic SeamStar BS 150 can be used with following materials : polyester, polypropylene, nylon, acrylics, PU coated fabrics, etc. These materials can be (non-)woven, needle felts, knits, films and laminates. Product application will include : Filtration, Body armor, Lingerie, Disposable garments , Carpets,...