BSS R3
4Pages

Catalog excerpts

FEATURES Corrosion-resistant construction Stainless Steel motor casing and fasteners Glass-filled thermoplastic impeller and casing. Upper and lower heavy duty ball bearing construction. Motor is permanently lubricated for extended service life and is powered for continuous operation. All ratings are within the working limits of the motor. Hard coated 400 series stainless steel shaft for improved corrosion resistance. Float switch is adjustable for various liquid levels. Easily removed for direct pump operation or switch replacement. Complete unit is lightweight, portable and easy to service. Available in manual and automatic versions. See next page for specific order numbers. SUBMERSIBLE SUMP PUMP A double labyrinth lip seal system protects the motor. It consists of three lip seals and a V-ring in addition to an impeller counterblade system which keeps solid particles away from the seal unit.

Open the catalog to page 1

Bell & Gossett Wastewater • Permanent-split-capacitor type • Class B insulation • Stainless steel shaft • Air filled design • Power cord length: SS03; 10 feet standard, 20 feet APPLICATIONS Specially designed for the following uses: • Basement draining • Water transfer • Dewatering FLOAT SWITCH OPTIONS • Discharge size: 1 1⁄2" NPT • Capacities: to 57 GPM • Maximum head: 34 feet TDH • Maximum solids: 3⁄8" spherical • Temperature: 104º F (40º C) maximum liquid • Models are available with a float switch. Several options for automatic operation. • “AV” models are supplied with a vertical float...

Open the catalog to page 2

Bell & Gossett Wastewater SERIES: SS03/SS07 DISCHARGE: 11⁄2" SOLIDS: 3⁄8" RPM: 3450 TOTAL DYNAMIC HEAD PERFORMANCE RATINGS Description Casing Impeller Suction strainer Shaft seal with cover Motor Ball Bearing Capacitor O-ring SS03 Total Head (feet of water) 5 10 15 20

Open the catalog to page 3

DIMENSIONS (All dimensions are in inches and weights in lbs. Do not use for construction purposes.) 75⁄8 POWER CORD: 16/3 SJTW WITH THREE PRONG GROUNDING PLUG TYPICAL SPECIFICATIONS The contractor shall furnish and install quantity _____ , Model SS _______________ submersible sump pump(s) as illustrated on the plans and in accordance with the following specifications. The submersible sump pump(s) shall be single-phase, 1/3 HP, 115V or 3/4 HP 115 or 230V. The power cord shall be 16/3 SJTW with a NEMA three prong grounding plug. The air-filled, PSC motor shall have Class B insulation,...

Open the catalog to page 4