*mydirectindustry

Catalogs
Bell Equipment Co SA
L1004E Wheeled Loader

L1004E Wheeled Loader

Product catalog summary

Specifications:
The L1004E Wheeled Loader is equipped with a John Deere POWERTECHTM 4045T engine, certified to EPA Tier III emissions, delivering a net peak power of 74 kW at 2,800 rpm. It features a 4-cylinder engine with a displacement of 4.5 L and a maximum net torque of 396 Nm at 1,400 rpm. The loader has an operating weight of 8,510 kg and a bucket capacity of 1.5 m3.

Performance:
The loader's breakout force is 7,342 kg, with a full turn tipping load of 5,260 kg. It has a maximum lift capacity at ground level of 4,400 kg and at maximum height of 4,030 kg. The steering system conforms to SAE J1511 standards, featuring a 60-degree arc and a turning radius of 3.9 m.

Transmission and Axles:
The hydrostatic transmission offers infinitely variable speed control with two speed ranges, achieving travel speeds of 8 km/h in gear 1 and 29.9 km/h in gear 2. The axles include heavy-duty outboard planetary final drives and manual locking front differentials.

Hydraulic System:
The loader uses a fixed-displacement gear pump with a maximum flow of 114 L/min at 2,400 rpm and a pressure of 22,994 kPa. The hydraulic cycle times are 5.3 seconds for raising, 1.5 seconds for dumping, and 4 seconds for lowering.

Dimensions:
The loader's dimensions include a height to the top of the cab of 3,020 mm, a wheelbase of 2,775 mm, and an overall length of 6,395 mm. The bucket width is 2,400 mm, and the ground clearance is 386 mm.

Material Handling:
The loader is capable of handling various materials with densities ranging from 590 kg/m3 for cinders to 2,790 kg/m3 for magnetite, iron ore. Recommended payloads are 60% of the articulated tipping load for uneven ground and 80% for smooth surfaces, in accordance with EN474-3 & ISO 8313 standards.

Additional Features:
The loader includes a hydraulically actuated, self-adjusting internal wet-disk brake system, and a spring-applied, hydraulically released parking brake. It is equipped with 17.5 R25 standard tyres and has a fuel tank capacity of 160 L.

Catalog excerpts

WHEELED LOADER Net Peak Power : 74 kW Bucket Capacity: 1.5 m3 Operating Weight : 8 510 kg Full Turn Tipping Load: 5 260 kg Breakout Force: 7 342 kg

Open the catalog to page 1

ENGINE Type Non-road emissions standard Net Peak Power Net Rated Power Cylinders Displacement Maximum Net Torque Lubrication Cooling Fan Fuel System Electrical System Batteries Aspiration Air Cleaner TRANSMISSION Type Operator Travel Speeds Gear 1 Gear 2 John Deere POWERTECHTM 4045T Certified to EPA Tier III emissions 74 kW @ 2 800 rpm 72 kW @ 2 400 rpm 4 4.5 L 396 Nm @ 1 400 rpm Pressure system with full-flow spin-on filter Electronically controlled unit injection pump Hydraulically driven, proportionally controlled Sucker type, Hydraulically driven 12 volt with 65-amp sealed alternator 2 x...

Open the catalog to page 2

Maximum Lift Capacity Lift at Ground level Lift at Maximum Height Turning Radius (measured to centerline With 1,5 m3 bucket with teeth Power, fully hydraulic plus 27° rear wheel steering Bucket Type/Size Bucket Width Tipping Load, Straight Tipping Load, Full Turn, (30°) Turning Circle Radius (Bucket In Carry Position) Operating Weight QUICK-COUPLER PALLET Tipping Load, Straight (fork level, load centered Tipping Load, Full Turn (fork level, load centered Recommended payload for uneven ground = 60% of articulated tipping load Recommended payload for smooth surfaces = 80% of articulated tipping...

Open the catalog to page 3

D Length from Centerline to Front Axle 1 150 mm G Height to Hinge Pin, Fully Raised 3 675 mm H Dump Reach at Full Height 915 mm I Maximum Digging Depth 53 mm K Maximum Rollback at Full Height 63° L Bucket Du mp at Full Height 42° M Maximum Rollback at Ground Level 45° N Overall Bucket Width 2 400 mm P Outside Wheel Width 2 314 mm Q Full Turn Radius, Inside 2 186 mm R Full Turn Radius, Outside 4 500 mm A Reach, Fully Raised B Fork Height, Fully Raised C Maximum Reach, Fork Level D Fork Height, Maximum Reach E Reach, Groung Level F Depth Below Ground E-mail: [email protected] • www.bellequipment.com...

Open the catalog to page 4

L1004E Wheeled Loader

L1004E Wheeled Loader

Catalog excerpts

All Bell Equipment Co SA catalogs and technical brochures

Archived catalogs