Engine Specifications:
The John Deere PowerTech™ 4045T engine is turbocharged and certified to EPA Tier 2 emissions standards. It has a displacement of 4.5 liters, delivering a net peak power of 69 kW at 2,000 rpm and a net peak torque of 384 Nm at 1,400 rpm. The engine features a pressure lubrication system with a spin-on filter and cooler, a dual-stage dry type air cleaner, and a suction-type cooling fan.

Powertrain:
The vehicle is equipped with a 4-speed powershift transmission with helical-cut gears and hydraulic reverse. It includes a single-stage, dual-phase torque converter with a 2.631:1 stall ratio. Maximum travel speeds range from 6 km/h in first gear to 36 km/h in fourth gear. The axle oscillations are 22º, and the differentials are automatic with traction-control limited slip.

Hydraulics:
The hydraulic system features an open center, gear type tandem pump with a flow rate of 136 L/min at 2,200 rpm and a system relief pressure of 24,993 kPa. The main pump is supported by a 6-micron filtration system.

Electrical System:
The electrical system operates on a 12-volt system with a 70-amp alternator. It includes a single battery with a 190-minute reserve capacity and 950 CCA.

Operator Station:
The operator station is designed with a modular ROPS/FOPS canopy, providing left and right access. It includes features such as slip-resistant steps, a headliner, a coat hook, and multiple 12-volt outlets. The cab is equipped with a heater/defroster/pressurizer and optional air conditioning.

Overall Vehicle:
The vehicle has a unitized one-piece construction mainframe with a ground clearance of 170 mm. It features a fuel tank capacity of 155 liters and a hydraulic system capacity of 91 liters. The overall length is 4.75 meters, and the height to the top of the ROPS/Cab is 2.870 meters.

Dimensions:
Key dimensions include a length from axle to axle of 2.11 meters, an overall width of 2.405 meters, and a ground clearance of 0.170 meters. The tractor width is 1.750 meters at the front and 1.790 meters at the rear.