*mydirectindustry

914J

1 / 4 PagesView full catalog

914J

Product catalog summary

Engine Specifications:

Manufacture and Model: John Deere PowerTech™ 4045T, turbocharged, certified to EPA Tier 2 emissions.
Displacement: 4.5 L.
Net Peak Power: 69 kW at 2,000 rpm.
Net Peak Torque: 384 Nm at 1,400 rpm.
Net Torque Rise: 46%.
Cooling: Suction fan, oil-to-water engine oil cooler, and dual-stage dry type air cleaner.

Powertrain:

Transmission: 4-speed, full powershift with hydraulic reverse and electric clutch cutoff.
Torque Converter: Single stage, dual phase with 2.631:1 stall ratio.
Maximum Travel Speeds: Up to 36 km/h forward.
Axle Ratings: Front axle static 12,000 kg, rear static 13,000 kg.
Differentials: Automatic, traction-control limited slip.

Hydraulics:

Main Pump: Open center, gear type with 106 L/min flow at 2,200 rpm.
System Relief Pressure: 24,993 kPa.
Loader Controls: Single-lever control with electric clutch cutoff switch.

Electrical System:

Voltage: 12 volt.
Alternator Rating: 70 amp.

Operator Station:

Type: Canopy, isolation mounted, ROPS/FOPS with left/right access.
Features: Headliner, dome light, tinted safety glass, windshield wipers, heater/defroster, and 12-volt outlets.

Overall Vehicle:

Mainframe: Unitised one-piece construction.
Tyres: Front - 12.5/80-18, Rear - 16.9-28 R-4.
Serviceability: Hydraulic oil filter with 6-micron filtration.

Dimensions:

Overall Length: 4.750 m.
Height to Cab/ROPS Top: 2.790 m.
Overall Width: 2.405 m.

Operating Weights:

Unladen Total: 5,703 kg.
Laden Total: 9,513 kg.

Additional Features:

Loader bucket anti-spill, return-to-dig feature, and bucket-level indicator.
Hydraulic system with independent reservoir and 6-micron filter.
Electrical system with 70-amp alternator and single battery with 950 CCA.
Operator's station with modular-design ROPS/FOPS canopy, ergonomic features, and comprehensive monitoring system.

Catalog excerpts

Net Peak Power : 69 kW Net Peak Torque : 384 Nm Operating Weight: 5 703 kg

Open the catalog to page 1

ENGINE Manufacture and Model John Deere PowerTech™ 4045T turbocharged and standard Non-Road Emission Standards Certified to EPA Tier 2 emissions Displacement 4.5 L Net Peak Power (ISO9249) 69 kW @ 2,000 rpm Net Peak Torque (ISO9249) 384 Nm @ 1,400 rpm Net Torque Rise 46% Lubrication Pressure system with spin-on filter and cooler Air Cleaner Dual-stage dry type with safety element and evacuator valve COOLING Fan Type Suction Engine Coolant Rating -30°C Engine Oil Cooler Oil to water POWERTRAIN Transmission 4-speed, helical-cut gears, full powershifted with hydraulic reverse standard; electric...

Open the catalog to page 2

ENGINE • Certified to EPA Tier 2 emissions • John Deere Model 4045T - 4.5litre, 92 net peak hp (69 kW turbocharged, isolation mounted • Vertical spin-on engine oil filter • Vertical spin-on fuel filter with water seperator • 1 micron Ultra Fine Diesel Filter • Oil-to-water engine oil cooler • Antifreeze, -30°C • Coolant recovery tank • Serpentine belt with automatic belt tensioner • Suction-type cooling fan • Enclosed safety fan guard • High ambient temperature engine cooling • Dual-element dry-type air cleaner • Muffler, under hood with curved-end exhaust stack POWERTRAIN • Powershift transmission:...

Open the catalog to page 3

All dimensions are shown in millimetres, unless otherwise stated between brackets. Under our policy of continuous improvement, we reserve the right to change technical data and design without prior notice. Photographs featured in this brochure may include optional equipment. BELL INTERNATIONAL: Tel: +27 (0)35-907 9431 E-mail: [email protected] Web: www.beMequipment.com Strong Reliable Machines Strong Reliable Support nun Spec/1028/06/11 - 914 Loader Rev 1

Open the catalog to page 4

914J

914J

Catalog excerpts

All Bell Equipment Co SA catalogs and technical brochures

Archived catalogs