video corpo

315SK

315SK

315SK

Product catalog summary
Specifications:
The 315SK Tractor Loader Backhoe is powered by a John Deere PowerTech™ 4045T turbocharged engine, delivering a net peak power of 70 kW and a net peak torque of 384 Nm. It complies with EPA Tier 2 / EU Stage II emissions standards and has a displacement of 4.5 L. The operating weight varies from 7,609 kg for 2WD to 8,543 kg for the WORK PRO model.
Performance and Features:
Designed for high productivity, the backhoe features powerful hydraulics, a PowerShift™ transmission for smooth gear changes, and a fifth gear for transport speeds up to 40 km/h. It is compatible with J-Series attachments and includes features like limited-slip mechanical-front-wheel drive and a redesigned cooling package.
Maintenance and Durability:
The K-Series is designed for reduced maintenance with wet-sleeve engine liners, a welded mainframe, and planetary final drives. It offers extended service intervals of 500 hours for the engine and 2,000 hours for hydraulic oil. Self-lubricating rear axle bearings and synthetic bushings minimize the need for frequent greasing.
Operator Comfort and Convenience:
The cab provides a panoramic view and includes an automatic climate-control system, ergonomic controls, and a redesigned HVAC system. Features like a sealed-switch module and keyless start enhance convenience.
Hydraulics and Controls:
The hydraulic system includes an open center, gear type main pump with a flow rate of 136 L/min for the backhoe and 106 L/min for the loader. The system relief pressure is 24,993 kPa. Controls include two-lever manual for the backhoe and single-lever with electric clutch cut-off for the loader.
Dimensions and Capacities:
The backhoe offers a digging depth of up to 5.49 m with an extendable dipperstick. The machine's overall width is 2.49 m, with a bucket rotation of 190 degrees. Refill capacities include a 155.2 L fuel tank and an 89.3 L hydraulic system.
Specifications Overview:
  • Dimensions: Overall transport length is 5.26 m, with a stabilizer spread of 2.4 m and a height to the top of the ROPS/Cab at 2.79 m.
  • Loader Performance: Maximum bucket dump angle is 45 degrees, with a rollback angle at ground level of 40 degrees. The bucket capacity is 1.00 m3 with a breakout force of up to 45.8 kN.
  • Lift Capacities: Lift capacities are provided as over-end values in kg according to SAE J31, representing 87% of the maximum lift force.
Engine Specifications:
  • The engine features a vertical spin-on engine oil filter, a vertical spin-on fuel filter with a water separator, and an oil-to-water engine oil cooler.
Powertrain Details:
  • Equipped with a powershift transmission, torque converter, and Transmission Control Lever (TCL) with a twist grip F-N-R.
  • Includes a differential lock, electric foot-actuated, and power-assisted hydraulic service brakes conforming to ISO 3450 standards.
Backhoe and Loader Features:
  • Standard dipperstick with a 4.29 m digging depth and an extendable dipperstick option.
  • Loader features include an anti-spill bucket, return-to-dig feature, and single-lever control with electric clutch cut-off switch.
Hydraulic and Electrical Systems:
  • Hydraulic system includes a 136 L/min tandem gear pump and an independent hydraulic reservoir.
  • Electrical system operates on a 12-volt system with a 90 amp alternator and a single battery with a 190 min reserve capacity.
Operator's Station:
  • Features a modular-design ROPS/FOPS level 2 cab with molded roof, slip-resistant steps, and ergonomically located handholds.
  • Includes a mechanical suspension deluxe fabric swivel seat with lumbar adjustment and armrests, and an air conditioner option.
Overall Vehicle Features:
  • One-piece unitized construction mainframe, vehicle tie-downs, and a 204 kg front counterweight.
  • Additional features include a sound reduction package and dent-resistant full-coverage rear fenders.
Contact Information:
For more information, contact Bell International at various international numbers or visit their website at www.bellequipment.com.
See more

Catalog excerpts

315SK-1

(4x4) Tractor Loader Backhoe • Net Peak Power: 70 kW • Net Peak Torque: 384 Nm • Operating Weight: 2WD - 7 609 kg 4WD - 7 829 kg WORK PRO - 8 543 kg

 Open the catalog to page 1
315SK-2

Shift Productivity into a higher gear Powerful and responsive hydraulics deliver generous lift capacity and breakout to both working ends – along with impressive backhoe crowd power and swing torque. As always, our PowerShift™ transmission provides smooth on-the-go clutch-less gear changes. What's more, a fifth gear makes it even more nimble and quick, providing transport speeds up to 40 km/h. Add Autoshift, and you'll have the smoothest-shifting backhoe available. Already own our J-Series Backhoes? Loader, backhoe buckets, as well as front and rear attachments, are compatible with the K-Series....

 Open the catalog to page 2
315SK-3

Reduced maintenance From the increased bonnet tilt that allows more engine access, to the tilt-out coolers that open up the cores – the K-Series is loaded with features that make it as easy to maintain as it is to operate. Same-side ground-level service points help daily checks and top-ups go more quickly. Other features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease nipples help increase uptime and lower daily operating costs. And because no maintenance beats low maintenance, self- adjusting serpentine belts, park brakes, and wet-disc...

 Open the catalog to page 3
315SK-4

Big Productivity begins here Who wouldn't be more productive in the spacious cab of a K-Series Backhoe? Its wide expanse of tinted glass provides a virtually unobstructed panoramic view of the work at hand and surrounding job site. The enhanced automatic high-velocity climate-control system's repositioned vents direct air more efficiently to keep the view clear and operator comfortable. You will also find more storage space, with more lockable compartments for securing carry-ons. And there's a new sealed-switch module that provides convenient, low-effort push-button operation of numerous functions...

 Open the catalog to page 4
315SK-5

1. You've got cruise control in your car – why not add it to your backhoe? Rotary throttle lets you dial-in the speed you need. In addition to operating the backhoe and loader, EH joysticks provide smooth, responsive control of auxiliary loader attachments, extendable dipperstick, backhoe auxiliary attachments, hammer, mechanical-frontwheel drive, and horn. 2. Enabled through the monitor, differential lock protection prevents engagement at high travel speeds and the resulting wear and tear on axle components. 3. To conserve fuel and comply with regional air and bystander noise regulations, auto-shutdown...

 Open the catalog to page 5
315SK-6

315SK Backhoe Loader ENGINE Manufacture and Model John Deere PowerTech™4045T turbocharged, standard Non-Road Emission Standards EPA Tier 2 / EU Stage II emissions Displacement 4.5 L Net Peak Power (ISO 9249) 70 kW @ 2,000 rpm Net Peak Torque (ISO 9249) 387 Nm @ 1,300 rpm Net Torque Rise 45% Lubrication Pressure system with spin-on filter & cooler Air Cleaner Dual-stage dry type with safety element and evacuator valve COOLING Fan Type Engine Coolant Rating Engine Oil Cooler POWERTRAIN Transmission Torque Converter Maximum Travel Speeds (with 16.9-28 rear tyres) Gear 1 Gear 2 Gear 3 Gear 4 Gear...

 Open the catalog to page 6
315SK-7

Specifications OVERALL DIMENSIONS A B C D E BACKHOE DIMENSIONS/PERFORMANCE Backhoe specifications are with 610 mm x 0.21 m3 bucket Ground Clearance (minimum) Overall Length (transport) Stabiliser Spread Height to Top of ROPS/Cab0 Length from Axle to Axle Non-Powered Front axle Mechanical-Front-Wheel-Drive Axle LIFT CAPACITY WITH QUICK-COUPLER/FORKS 2073 kg A1 Maximum Height 3162 kg B1 Maximum Reach 4145 kg C1 At Ground Line 211 mm D1 Below Ground Line 315SJ Backhoe with 315SJ Backhoe with 315SK Backhoe with Standard Dipperstick Standard Dipperstick Standard Dipperstick 315SJ Backhoe with 315SK...

 Open the catalog to page 7
315SK-8

Powertrain ● Powershift transmission: Torque converter with Transmission Control Lever (TCL) twist grip F-N-R, with neutral safety switch interlock (1 through 4 gears) ● 5th gear over-drive ● Transmission oil cooler ● Vertical spin-on transmission filter ● Differential lock, electric foot-actuated ● Planetary final drives ● Power assisted hydraulic service brakes (conform to ISO 3450): Inboard, wet multi-disc, self-adjusting and self equalising ● Parking/emergency brake with electric switch control (conforms to ISO 3450): Spring applied, hydraulically released wet multi-disc / Independent of...

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.