Ultra wide tolerance flange adaptor SERIES 3200 Enables the mechanical jointing of a flange and a pipe of various materials. • Ultra wide tolerance range: an average of 40 mm. • Small number of models for a Nominal Diameter. • Reliability: - ermanent leak tight joint when compressing the gasket P between the end flange and the sleeve onto the pipe surface. - lue epoxy powder coating (120 μm) and Dacromet® 500 Gr.B B for the bolts. • Ease and speed of installation: - ± 10° angular deflection by side, - Easy mounting with interchangeability of bolts direction, - Accommodates misalignment, - Absorbs expansion and contraction, - Important setting gap. • Conformity to standards: - NFA 48 830: Foundry products – Spheroïdal graphite cast iron fittings for PVC drinking water pipes under pressure. - 545: Ductile iron pipes, fittings, accessories and their joints EN for water pipelines – requirements and test methods. - 1092-2: Flanges and their joints – Circular flanges for pipes, EN valves, fittings and accessories, PN designated. - ISO 2531: Ductile iron pipes, fittings, accessories and their joints for water applications. - ISO 7005-2: Metallic flanges and cast iron flanges. - ISO 7483: Dimensions of gaskets for use with flanges to ISO 7005. • Approval: - Drinking water approved. • Nota: T his coupling does not resist to longitudinal forces and pipe pull out will occur. Ensure adequate restraint is provided. Technical data • Range: DN 50 to 800. • Maximal working pressure: PN 16. • Temperatures: +0°C to +60°C. • Flange drilling according to ISO PN 10/16. • Torque: 60 to 70 Nm. Particularly design for asbestos cement or concrete pipe. Used as straight or stepped flange adaptor on: • Drinking water networks. • Irrigation networks. • Sewage networks. • Sealing test according to standard ISO 2531.

Ultra wide tolerance flange adaptor Flange End-flange Gasket Bolts Ductile iron/EN-GJS-500-7 Ductile iron/EN-GJS-500-7 EPDM Steel C45 Cl. 8.8* * Stainless steel on request SERIES 3200 ULTRA WIDE TOLERANCE FLANGE ADAPTOR Bº zabalondo, 31 | 48100 Mungia (Bizkaia) | Spain | Phone: +34 94 488 91 00 BELGICAST - SERIES 3200 ULTRA WIDE TOLERANCE FLANGE ADAPTOR - EN The technical data and performance can be modified without prior notice depending on the technical evolution