Universal saddle. Series 1400 • Universal saddle body manufactured in EN-GJS-400-15 epoxy coated. • asket manufactured in EPDM according to UNE EN 681/1. G • AISI-304 stainless steel band (Series 1450). BODY OR HEAD CROSS-REFERENCE CHART A single head to fit pipes of all diameters. USE: ast Iron, Ductile Iron, Steel C and Fibre Cement Pipes. FUNCTIONAL ADVANTAGES Both the body and the gasket fit nine nominal diameters for different tubes. Work-pipe universal saddle. Series 1410 Single body (head) means we can cover 8-9 nominal diameters for different pipes. Guaranteed watertight. Body manufactured in EN-GJS-400-15 + CATAPHORESIS Joint manufactured in EPDM according to UNE EN 681/1. AISI - 304 stainless steel band (Series 1450). Stainless steel spatula (AISI-304). Cast iron hexagonal head reducing screw. MATERIAL: EN-GJS-400-15 Series 1.450 USE: Cast Iron, Ductile Iron, Steel and Fibre Cement Pipes. BODY OR HEAD CROSS-REFERENCE CHART Instructions for connection to working pipe REF. 3 Pipe closing gasket 4 Hexagonal head reducing screw 5 Watertight closing gasket • Clamp saddle to pipe. • Thread Leya drill in intake ring and perforate pipe. • Withdraw cutter or drill to a position above slot. • Push spatula into slot to cut off water flow. • Withdraw drill and complete connection. • Withdraw spatula. • Closure is now watertight because joint in figure covers space left free by the spatula.