MAJOR flange adaptor for cast iron pipes - Series C1 10 Enables mechanical jointing of a flange and a pipe. Description • High performance: - Guaranteed sealing with shut-off seal and antiflow ring. - Corrosion protection: epoxy powder coating. • Ease and speed of installation: - Angular deflection: ± 3°. - Single bolting. • Conformity to standards: - N 1092-2: Flanges and their joints. Circular flanges for pipes, valves, E fittings and accessories, PN designated. Part 2: Cast iron flanges. - SO 2531: Ductile iron pipes, fittings, and accessories and their joints I for water applications. - SO 7005-2: : Metallic flanges and cast iron flanges. I Part 2: Cast iron flanges. - SO 7483: Dimensions of gaskets for use with flanges to ISO 7005. I • Approval: - Approved for drinking water consumption. • Nota: - his coupling does not resist to longitudinal forces and pipe T pull out will occur. Ensure adequate restraint is provided. Technical data • Range: - From DN 40 to 400 for cast iron pipes. • PN 16. • Flanges drilling: - ISO PN 10/16 - Double drilling ISO PN 10 / ISO PN 16 for DN 200 to 400. • Temperatures: from 0°C to +50°C. Applications • Drinking water networks. • Fire protection networks. • Irrigation networks.

MAJOR flange adaptor for cast iron pipes Ductile iron /EN-GJS 450-10 Ductile iron /EN-GJS 450-10 MAJOR for ductile iron pipes - Series C1 10 DN * Double drilling 60 and 65. ** Double drilling ISO PN 10 and ISO PN 16. The technical data and performance can be modified without prior notice depending on the technical evolutio