*mydirectindustry

FS-20

Product catalog summary

Product Overview: The FS-20 two band stainless steel repair clamps by TALIS are designed for permanent repairs of broken and damaged pipes used in water systems. They are suitable for various pipe materials including Ductile Iron, Cast Iron, Steel, Asbestos Cement, and certain plastic pipes like PVC and PE, with specific conditions and restrictions.

Specifications:

Material: Stainless steel AISI 304 or AISI 316L, with deburred and passivated metal parts.
Rubber Gaskets: Standard certified EPDM, suitable for potable and waste water up to 23°C, with WRAS certification.
Sizes: Available for pipes DN 80 to DN 800, with lengths ranging from 200 mm to 600 mm.
Pressure Ratings: Vary by pipe size and damage type, with a maximum of 16 bar for DN 80-150 and 10 bar for DN 175-500.

Installation Guidelines:

The clamp width should match or exceed the pipe's outer diameter and be significantly longer than any crack.
For PVC pipes, the clamp width should be 50% longer, and bolt torque reduced by 50%.
Maximum allowable pipe end separation is 10 mm, deflection is 2 degrees, and offset is 3 mm.
No special tools are required for installation, and clamps can often be installed without releasing pipe pressure.

Design Features:

Double band design with a working range of 20-22 mm.
Vulcanized bridge plates ensure leakproof sealing.
U-shaped lifter bars and stainless steel, zinc-plated nuts and washers prevent galling.
Flexible, glass-fiber reinforced tape secures the rubber gasket to the steel band.

Contact Information: For further details and certifications, contact TALIS UK at their Bridgend office or visit their website.

Catalog excerpts

FS-20 two band stainless steel repair clamp

Open the catalog to page 1

FS-20 two band stainless steel repair clamps FS-20 two band stainless steel repair clamps Material speciÞcation: • All metal parts: stainless steel AISI 304 or AISI 316L. • Metal parts have been deburred and are passivated to leakproof sealing restore the corrosion resistance to its original state after the welding process. The TALIS stainless steel repair clamps style FS-20 are used for permanent repairs of broken and damaged pipes for water. • Double band (two sections) with a working range of 20-22 mm depending on the diameter • Standard certiÞed rubber gaskets EPDM. The rubber is tapered...

Open the catalog to page 2

www.talis-uk.com TALIS is the undisputed Number One for water transport and water flow control. TALIS has the best solutions available in the fields of water and energy management as well as for industrial and communal applications. We have numerous products for comprehensive solutions for the whole water cycle – from hydrants, butterfly valves and knife gate valves through to needle valves. Our experience, innovative technology, global expertise and individual consultation processes form the basis for developing long-term solutions for the efficient treatment of the vitally important resource...

Open the catalog to page 3

FS-20

FS-20

Catalog excerpts

All Belgicast catalogs and technical brochures