Dedicated coupling EUROCOUP Enables connection and sealing of two pipes’ ends. • For steel and ductile iron pipes. Others materials on request. • Ease of installation: - Angular deflection, - Accommodates misalignment, - Important setting gap. • Reliability: - Permanent leak tight joint when compressing the gasket between the end flange and the sleeve onto the pipe surface. - poxy powder coating and bolting made of steel. E Other coating on request. • Conformity to standards: - 545: Ductile iron pipes, fittings, accessories and their joints EN for water pipelines – requirements and test methods. - 1092-1: Flanges and their joints – Circular flanges for pipes, EN valves, fittings and accessories, PN designated. - ISO 2531: Ductile iron pipes, fittings, accessories and their joints for water applications. • Approval: - Drinking water approved. • Nota: This coupling does not resist to longitudinal forces and pipe pull out will occur. Ensure adequate restraint is provided. Technical data • Range: Straight coupling: - DN 350 to 1600 – PN according to DN. Stepped coupling - DN 350 to 1600 – PN according to DN. Other sizes on request. • Temperatures: +0°C to +60°C. • Drinking water networks. • Pumping, treatment, watertank. • Fire protection networks. • Irrigation networks. • Sewage networks and rain waters drainage

Dedicated coupling General information Pipe end preparation: At the end of the pipe in the area of the seal, pipe surface should be clean, smooth free from bumps, score marks, round. Equally pipe wrapping should be removed. To obtain a good tightness it is necessary to prepare the pipe end on a “L”distance of 250mm. Tolerances as stated in the tables. Information show the outside diameter tolerances at the ends of the pipes. Some pipes have bigger tolerances, in that case please precise when ordering the exact external diameter. The best way to define the diameter is to measure the circumference....

Dedicated coupling Item Designation 1 Sleeve 1 2 End-flanges 2 3 Gaskets 2 4 Bolts acc/DN Coating * Nitrile on request. ** tainless steel 316 on request. S *** ther on request. O Welded steel Welded steel EPDM* Mild steel HD galvanised ** Blue epoxy powder*** RAL 5015 250 μm Other sizes, on request. For ductile iron pipes Other sizes, on request. Angular deflection per coupling • According to above information. • Other PN, on request. UNIJOINT - EUROCOUP DEDICATED COUPLING - EN

Eurocoup stepped coupling Stepped coupling Designation Sleeve End-flange Gaskets Bolts Coating Materials Welded steel Welded steel EPDM* Mild steel HD galvanised Blue epoxy powder** RAL 5015 250 μm * Nitrile on request. ** Other on request. Pipes tolerances DI mm Steel mm Other sizes, on request. • According to above table. • Other PN, on request. TALIS Management Holding GmbH Meeboldstraße 22 89522 Heidenheim an der Brenz Germany Phone: +49 7321 320 0 UNIJOINT - EUROCOUP DEDICATED COUPLING - EN The technical data and performance can be modified without prior notice depending on the technical...